مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
27.950 €
(33.260 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
27.950 €
(33.260 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.760 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف الإعلان:
- A200-96-225
- رقم المرجع:
- 5911 b
- تحديث:
- آخر مرة في ١٤.٠٥.٢٠٢٦
وصف
* ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange eye:
* Height-adjustable drawbar, adjustable up to 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange tow eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* External, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right, mounted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed platform:
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Bolted flat steel front wall
* Fold-down steel side walls, trapezoidal profile, with sideboard lift assist
* Steel rear wall retractable between the ramps – storage bracket for non-use inside in front of the front wall
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° cranked, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* Single-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
* Side board color in RAL 9010 pure white
Hfedoxglibepfx Apaeg
* Painting of the side walls in another RAL color available at extra charge
----Information:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approximately CW 27/2026
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange eye:
* Height-adjustable drawbar, adjustable up to 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
* 40 mm flange tow eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* External, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right, mounted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed platform:
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Bolted flat steel front wall
* Fold-down steel side walls, trapezoidal profile, with sideboard lift assist
* Steel rear wall retractable between the ramps – storage bracket for non-use inside in front of the front wall
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° cranked, with 2 t lashing capacity every 480 mm
* Option to install 3 t retractable lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* Single-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall
* Side board color in RAL 9010 pure white
Hfedoxglibepfx Apaeg
* Painting of the side walls in another RAL color available at extra charge
----Information:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approximately CW 27/2026
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
172 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
إعلان صغير
Egestorf
2.752 km
مقطورة مع منصة عمل
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
تم حذف إعلانك بنجاح
حدث خطأ






























































































































