مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
سعر ثابت دون ضريبة القيمة المضافة
27.950 €
(33.260 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
27.950 €
(33.260 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.760 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A152-54-665
- الرقم المرجعي:
- 5911 a
- التحديث الأخير:
- في ٠٥.٠٢.٢٠٢٦
الوصف
* ETÜ-TA-R 14.4:
---- Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake actuators
---- Axles:
* 2 x 7 t Gigant axles
---- Suspension:
* Parabolic springs with compensating unit
---- Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
---- Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
---- General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable support legs at the rear
* Plastic toolbox, fitted externally at the front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
---- Lowbed deck:
* 50 mm softwood floor
* Preparation in front of bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth steel sheet
* Side walls made of steel, trapezoidal profile, foldable, with drop-side spring assist
* Rear wall made of steel, retractable between the ramps – bracket for storage when not in use, fitted inside at the front bulkhead
* Removable bolted rear stanchions
---- Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing point in each of the four corners (front/rear)
* Various boreholes in the front and end crossmember for 1.2 t lashing options
---- Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together up to 20 mm)
* Rear approach angle approx. 860 mm
---- Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall
* Side panel color RAL 9010 pure white
* Side wall painting in any RAL color available for an additional charge
---- Information:
* --Reinforced and certified body as per EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
Bcsdporvvfljfx Ab Eow
---- Delivery time:
* Available from week 08/2026
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
---- Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake actuators
---- Axles:
* 2 x 7 t Gigant axles
---- Suspension:
* Parabolic springs with compensating unit
---- Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
---- Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
---- General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable support legs at the rear
* Plastic toolbox, fitted externally at the front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
---- Lowbed deck:
* 50 mm softwood floor
* Preparation in front of bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth steel sheet
* Side walls made of steel, trapezoidal profile, foldable, with drop-side spring assist
* Rear wall made of steel, retractable between the ramps – bracket for storage when not in use, fitted inside at the front bulkhead
* Removable bolted rear stanchions
---- Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing point in each of the four corners (front/rear)
* Various boreholes in the front and end crossmember for 1.2 t lashing options
---- Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together up to 20 mm)
* Rear approach angle approx. 860 mm
---- Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall
* Side panel color RAL 9010 pure white
* Side wall painting in any RAL color available for an additional charge
---- Information:
* --Reinforced and certified body as per EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
Bcsdporvvfljfx Ab Eow
---- Delivery time:
* Available from week 08/2026
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
إعلان صغير
Egestorf
2.752 km
مقطورة مع منصة عمل
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
تم حذف إعلانك بنجاح
حدث خطأ
























































































































