مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
29.900 €
(35.581 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
29.900 €
(35.581 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.750 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 7.000 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف الإعلان:
- A186-10-241
- رقم المرجع:
- 6180
- تحديث:
- آخر مرة في ١٤.٠١.٢٠٢٦
وصف
* ETÜ-TA-R 14.4:
Klodpfx Aov D Tcbjcwep
----Brake system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange towing eye:
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED lighting
----General attachments:
* Support winch at the front
* External folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall
* Side underride protection
* Plastic quarter mudguards
----Low-loader deck:
* 50 mm softwood flooring
* Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers
* Bolted front wall made from smooth sheet metal
* Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre
* Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
* Several holes in the front and rear cross members for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paint finish:
* Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side boards painted RAL 9010 pure white
* Side walls can be painted in a RAL colour of your choice at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf at the A7
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Klodpfx Aov D Tcbjcwep
----Brake system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange towing eye:
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED lighting
----General attachments:
* Support winch at the front
* External folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall
* Side underride protection
* Plastic quarter mudguards
----Low-loader deck:
* 50 mm softwood flooring
* Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers
* Bolted front wall made from smooth sheet metal
* Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre
* Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
* Several holes in the front and rear cross members for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paint finish:
* Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side boards painted RAL 9010 pure white
* Side walls can be painted in a RAL colour of your choice at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf at the A7
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
180 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.752 km
مقطورة مع منصة عمل
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
تم حذف إعلانك بنجاح
حدث خطأ










































































