مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
سعر ثابت دون ضريبة القيمة المضافة
27.950 €
(33.260 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
27.950 €
(33.260 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.760 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A200-96-220
- الرقم المرجعي:
- 59111 b
- التحديث الأخير:
- في ٠٥.٠٢.٢٠٢٦
الوصف
* ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports rear
* Plastic toolbox, front right, mounted externally on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for subsequent installation of container locks
* Screw-fastened bulkhead of smooth sheet metal
* Side walls made of trapezoidal steel sheet, drop-down with drop side spring lifter
* Steel tailgate, retractable between ramps – rack for idle position mounted inside on the bulkhead
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* Each front and rear corner equipped with 1 x 6.3 t lashing ring
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring unit, suitable for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm)
* Approach bevel at the rear approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear wall
* Drop side colour in RAL 2011 deep orange
* Painting of side walls in any RAL colour available at extra cost
----Info:
* -- Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate --
* New vehicle with manufacturer's warranty
Gbedjxglh Rspfx Ac Njh
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Brakes:
* Drum brakes
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports rear
* Plastic toolbox, front right, mounted externally on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for subsequent installation of container locks
* Screw-fastened bulkhead of smooth sheet metal
* Side walls made of trapezoidal steel sheet, drop-down with drop side spring lifter
* Steel tailgate, retractable between ramps – rack for idle position mounted inside on the bulkhead
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* Each front and rear corner equipped with 1 x 6.3 t lashing ring
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring unit, suitable for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm)
* Approach bevel at the rear approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear wall
* Drop side colour in RAL 2011 deep orange
* Painting of side walls in any RAL colour available at extra cost
----Info:
* -- Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate --
* New vehicle with manufacturer's warranty
Gbedjxglh Rspfx Ac Njh
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
إعلان صغير
Egestorf
2.752 km
مقطورة مع منصة عمل
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
تم حذف إعلانك بنجاح
حدث خطأ
























































































































