مقطورةMÜLLER-MITTELTAL
3-achs Plateu Anhänger, mit 3 Kabelböcken
مقطورة
MÜLLER-MITTELTAL
3-achs Plateu Anhänger, mit 3 Kabelböcken
سعر ثابت دون ضريبة القيمة المضافة
56.500 €
(67.235 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
56.500 €
(67.235 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 18.000 كجم
- الوزن الإجمالي:
- 24.000 كجم
- تكوين المحور:
- 3 محاور
- طول مساحة التحميل:
- 9.230 مم
- عرض مساحة التحميل:
- 2.480 مم
تفاصيل العرض
- معرّف القائمة:
- A208-17-157
- الرقم المرجعي:
- 6306
- التحديث الأخير:
- في ٢٣.١٢.٢٠٢٥
الوصف
* TP 30.0 with 3 cable drum mounts
----Braking system:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring actuators
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering function
----Drawbar:
* Drawbar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (no truck-side installation required)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General attachments:
* Aluminum air tank
* Stainless steel side toolbox approx. 1,000 x 300 x 600 mm
* Lateral underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix external frame, 45° bent, perforated for lashings, lashing force per point 2,000 kg at a spacing of 480 mm
* Optional installation of 3,000 kg folding lashing brackets at approx. 600 mm intervals – 12 units of 3,000 kg lashing brackets supplied on each side
* 5 pockets per side in the external frame for posts 100 x 50 mm – posts not included
* 30 mm screen-printed plywood floor
----Drum mounts:
* 3 zinc-plated drum mounts, secured via container lockings, with side forklift pockets center/center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm, max. drum width 1,650 mm
* Clear width between supports approx. 1,775 mm, with cross tie bar
* Max. drum weight per mount 6,000 kg
* Without drive and drum brake
* Support arm with tension lock for securing the drum spindle
* Steel drum spindle, 76 mm diameter with centering and rotating ends
* 2 clamping rings
* 2 centering cones made of polyamide
* 4 pieces 3.2 t lashing eyes on supports for customer-side securing of drums against rotation and uncoiling
----Loading height:
* Approx. 1,040 mm loaded
----Paintwork:
* Chassis, bogie, drawbar, exterior frame, underrun protection hot-dip galvanized
* Axles painted in black
----Notes:
* Technical gross weight up to 30 t possible
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
Lajdpfx Abox Nlkgsnjk
* Immediately available from Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Braking system:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring actuators
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lowering function
----Drawbar:
* Drawbar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (no truck-side installation required)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General attachments:
* Aluminum air tank
* Stainless steel side toolbox approx. 1,000 x 300 x 600 mm
* Lateral underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Platform:
* Zurr-fix external frame, 45° bent, perforated for lashings, lashing force per point 2,000 kg at a spacing of 480 mm
* Optional installation of 3,000 kg folding lashing brackets at approx. 600 mm intervals – 12 units of 3,000 kg lashing brackets supplied on each side
* 5 pockets per side in the external frame for posts 100 x 50 mm – posts not included
* 30 mm screen-printed plywood floor
----Drum mounts:
* 3 zinc-plated drum mounts, secured via container lockings, with side forklift pockets center/center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm, max. drum width 1,650 mm
* Clear width between supports approx. 1,775 mm, with cross tie bar
* Max. drum weight per mount 6,000 kg
* Without drive and drum brake
* Support arm with tension lock for securing the drum spindle
* Steel drum spindle, 76 mm diameter with centering and rotating ends
* 2 clamping rings
* 2 centering cones made of polyamide
* 4 pieces 3.2 t lashing eyes on supports for customer-side securing of drums against rotation and uncoiling
----Loading height:
* Approx. 1,040 mm loaded
----Paintwork:
* Chassis, bogie, drawbar, exterior frame, underrun protection hot-dip galvanized
* Axles painted in black
----Notes:
* Technical gross weight up to 30 t possible
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
Lajdpfx Abox Nlkgsnjk
* Immediately available from Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة مع منصة عمل
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
تم حذف إعلانك بنجاح
حدث خطأ









































































