مقطورةMÜLLER-MITTELTAL
3-achs Plateu Anhänger, mit 3 Kabelböcken
مقطورة
MÜLLER-MITTELTAL
3-achs Plateu Anhänger, mit 3 Kabelböcken
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
56.500 €
(67.235 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
56.500 €
(67.235 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
24.000 كجم
الوزن الأقصى للحمولة:
17.650 كجم
طول مساحة التحميل:
9.230 مم
عرض مساحة التحميل:
2.480 مم
محاور وعجلات
تكوين المحور:
3 محاور
تفاصيل العرض
- معرّف الإعلان:
- A208-17-152
- رقم المرجع:
- 6306b
- تحديث:
- آخر مرة في 24.10.2026
وصف
* TP 30.0 with 3 cable reels
----Brakes:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring accumulators
* Drum brakes
----Axle:
* 3 x 11 ton Gigant axles
----Suspension:
* Air suspension 17.5" with lifting and lowering system
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm drawbar eye
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck display via EBS signal - without truck-side installation
* 15-pole power plug
* 2 additional LED reversing lights (switched via reverse gear)
* LED lighting
----General components:
Iodpfx Acox Nlkajysii
* Aluminum air reservoir
* Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm
* Side impact protection
* Plastic quarter fender
* Underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled, with hole pattern for lashing straps, lashing force per lashing point 2,000 kg at a distance of 480 mm
* Installation of 3,000 kg drop-side brackets possible at a distance of approx. 600 mm - the scope of supply includes 12 pieces of 3,000 kg lashing brackets on each side
* 5 slots for tube supports 100 x 50 mm on each side in the outer frame - the supports are not included in the scope of supply
* 30 mm screen-printed floor
----Cable reel supports:
* 3 galvanized cable reel supports secured by container locks, with side forklift pockets, center to center 800 mm (width of the pockets 185 mm)
* Reel diameter max. 2,600 mm and reel width max. 1,800 mm
* Clear width between the support arms approx. 1,824 mm, with cross connection
* 6,000 kg reel weight per cable reel support
* Without drive and drum brake
* Support arm with clamping device for securing the reel shaft
* Steel reel shaft, 76 mm diameter, with centering and rotatable ends
* 2 spacing rings
* 2 centering cones made of polyamide
* 4 pieces of 3.2 ton lashing rings on the support arms for customer-side securing of the reel against rotation and unwinding
----Loading height:
* loaded approx. 1,040 mm
----Painting:
* Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized
* Axles painted in a black tone
* TP 30.0 with 3 cable reels
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
----Brakes:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring accumulators
* Drum brakes
----Axle:
* 3 x 11 ton Gigant axles
----Suspension:
* Air suspension 17.5" with lifting and lowering system
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm drawbar eye
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck display via EBS signal - without truck-side installation
* 15-pole power plug
* 2 additional LED reversing lights (switched via reverse gear)
* LED lighting
----General components:
Iodpfx Acox Nlkajysii
* Aluminum air reservoir
* Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm
* Side impact protection
* Plastic quarter fender
* Underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled, with hole pattern for lashing straps, lashing force per lashing point 2,000 kg at a distance of 480 mm
* Installation of 3,000 kg drop-side brackets possible at a distance of approx. 600 mm - the scope of supply includes 12 pieces of 3,000 kg lashing brackets on each side
* 5 slots for tube supports 100 x 50 mm on each side in the outer frame - the supports are not included in the scope of supply
* 30 mm screen-printed floor
----Cable reel supports:
* 3 galvanized cable reel supports secured by container locks, with side forklift pockets, center to center 800 mm (width of the pockets 185 mm)
* Reel diameter max. 2,600 mm and reel width max. 1,800 mm
* Clear width between the support arms approx. 1,824 mm, with cross connection
* 6,000 kg reel weight per cable reel support
* Without drive and drum brake
* Support arm with clamping device for securing the reel shaft
* Steel reel shaft, 76 mm diameter, with centering and rotatable ends
* 2 spacing rings
* 2 centering cones made of polyamide
* 4 pieces of 3.2 ton lashing rings on the support arms for customer-side securing of the reel against rotation and unwinding
----Loading height:
* loaded approx. 1,040 mm
----Painting:
* Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized
* Axles painted in a black tone
* TP 30.0 with 3 cable reels
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
158 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Egestorf
2.751 km
مقطورة مع منصة عمل
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
ناجح
تم إرسال رسالتك.
إعلان صغير
Egestorf
2.751 km
مقطورة
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
تم حذف إعلانك بنجاح
حدث خطأ




















































































