مقطورة نصف مفتوحة

Fliegl Plateauauflieger zum Fahrzeugtransport

Attention: The images are archive images!
2 units available

#Chassis, Semi-Trailer, and Freight Forwarding
Additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer, and above the wheels on the vehicle; frame in reinforced design for vehicle loads up to the outer frame; outer frame with "Load-Lock Profile" approximately every 400 mm.
10 pairs of lashing eyes recessed in the top/outside of the outer frame, 10 tons each.
24-ton, 2-speed support winch, single-sided operation, with a semi-circular lower part and a straight connecting plate, with stroke compensation.
Rear support, telescoping.
Attachment rail for loading ramps on the rear extension, spanning the entire width.
Iedpszu Aqxjfx Aa Isba
Rear extension, mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including underrun protection with extendable lighting.
Storage space for loading ramps integrated into the rear extension, usable only when the rear extension is extended by approximately 1,000 mm.
1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg.
Electric winch, 24 volts, pulling force approximately 8,165 kg, mounted centrally at the front, operated with a remote control.

#Axles and Suspension
"Axle/chassis laser-aligned" to reduce tire wear and fuel consumption.
Air suspension.
1st axle: automatic lift axle, also electrically operated from the truck, including forced lowering and starting assist.
SAF or BPW drum brake axles, at the manufacturer's choice.

#Wheels and Tires
235 / 75 R 17.5", manufacturer's choice.
Steel rims in twin configuration, factory silver.

#Electrical System
24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED.
2 white position lights in the front in LED.
2 white/red side marker lights in the rear in LED.
2 x 7-pin and 1 x 15-pin connectors at the front, non-interchangeable, without connection cable.
2 additional LED work lights at the rear.
1 rotating beacon with holder.
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug.
Additional 7-pin socket (according to ISO 1724) in the underrun protection at the rear.
LED work lights on the sides, 1 on the left and 1 on the right.

#Floor
Diamond-plate steel floor in welded design, rear extension in the driving lane area with diamond-plate steel, in the middle with steel tread plate.

#Country of Registration / Signage
Germany
with Dekra approval and certificate (according to §13 EG - FGV)
24/7 service hotline
prepared for single-row license plate holder
Contour marking with reflective strips according to ECE R 048, yellow on the sides and yellow at the rear.
Warning sign according to ECE - 70
Overall towing certificate for applying for § 70 approval for a towing vehicle upon collection at the Triptis plant (Please note the maximum permissible total towing weight in the truck documents; if necessary, apply for an increase in the total towing weight beforehand; an increase in the total towing weight is at the discretion of the truck manufacturer and does not have to be granted. Any costs incurred as a result will be charged separately).
1 to 3 stickers "Angles Morts" (according to regulations and technical feasibility).

#Painting
Frame: Hot-dip galvanized including passivation.
"15-year warranty against rust-through."
Support feet: Black coated.

2 units available.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.