مقطورة رول آفMÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
مقطورة رول آف
MÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
37.500 €
(44.625 € إجمالي)
سنة الصنع
2026
الحالة
مستعمل
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
37.500 €
(44.625 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 13.700 كجم
- الوزن الإجمالي:
- 18.000 كجم
- تكوين المحور:
- محورين
- التسجيل الأول:
- 03/2026
- الفحص القادم (TÜV):
- 03/2027
- طول مساحة التحميل:
- 7.000 مم
- عرض مساحة التحميل:
- 2.480 مم
تفاصيل العرض
- معرّف الإعلان:
- A222-55-692
- رقم المرجع:
- 6371
- تحديث:
- آخر مرة في ٠٣.٠٧.٢٠٢٦
وصف
* TRA 18.0:
* 2 in 1 = suitable for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10-ton axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
----Drawbar:
* Curved drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment system instead of drawbar spring
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation -
* LED tail lights 12 / 24 V
* 15-pole power connector
----General attachments:
* Toolbox made of powder-coated steel sheet, approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour strip on the side and rear
* Side underrun protection
* Plastic quarter fenders with splash guard
* Plastic rear impact buffer
* Foldable A-sign at the rear
----Loading area:
* Main frame with raised outer frame for guiding the roll-off containers
* Steel sheet floor with recesses for the rollers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-way clamp locking and mech. pluggable stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welding bead as anti-slip coating in the track area of the access ramp
* Mech. support legs at the rear
Bdsdpjzihcpsfx Abnod
----Load securing:
* 1 pair of 10-ton UVV lashing rings at the front on the front wall beam
* 3 pairs of 10-ton UVV lashing rings on the side in the outer frame
* 4 x 2-ton lashing eyes in a cloverleaf design on each side
* 4 x 8-ton lashing brackets embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* but the drawbar, axles, and air tank are painted in a black tone
----Information:
* Vehicle has full manufacturer's warranty until 03/2027
* Errors and prior sale excepted
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery time:
* Immediately available from Egestorf on the A7
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
* 2 in 1 = suitable for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10-ton axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
----Drawbar:
* Curved drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment system instead of drawbar spring
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation -
* LED tail lights 12 / 24 V
* 15-pole power connector
----General attachments:
* Toolbox made of powder-coated steel sheet, approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour strip on the side and rear
* Side underrun protection
* Plastic quarter fenders with splash guard
* Plastic rear impact buffer
* Foldable A-sign at the rear
----Loading area:
* Main frame with raised outer frame for guiding the roll-off containers
* Steel sheet floor with recesses for the rollers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-way clamp locking and mech. pluggable stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welding bead as anti-slip coating in the track area of the access ramp
* Mech. support legs at the rear
Bdsdpjzihcpsfx Abnod
----Load securing:
* 1 pair of 10-ton UVV lashing rings at the front on the front wall beam
* 3 pairs of 10-ton UVV lashing rings on the side in the outer frame
* 4 x 2-ton lashing eyes in a cloverleaf design on each side
* 4 x 8-ton lashing brackets embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* but the drawbar, axles, and air tank are painted in a black tone
----Information:
* Vehicle has full manufacturer's warranty until 03/2027
* Errors and prior sale excepted
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery time:
* Immediately available from Egestorf on the A7
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
172 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة رول آف
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
تم حذف إعلانك بنجاح
حدث خطأ
























































































































