مقطورة رول آفMÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
مقطورة رول آف
MÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
37.500 €
(44.625 € إجمالي)
سنة الصنع
2026
الحالة
مستعمل
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
37.500 €
(44.625 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
18.000 كجم
الوزن الأقصى للحمولة:
13.700 كجم
طول مساحة التحميل:
7.000 مم
عرض مساحة التحميل:
2.480 مم
محاور وعجلات
تكوين المحور:
محورين
التوثيق والشهادة
الفحص القادم (TÜV):
03/2027
مزيد من التفاصيل
التسجيل الأول:
03/2026
تفاصيل العرض
- معرّف الإعلان:
- A222-55-687
- رقم المرجع:
- 6371a
- تحديث:
- آخر مرة في 21.07.2026
وصف
* TRA 18.0:
* 2 in 1 = for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
----Drawbar:
* Curved drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment system instead of drawbar spring
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation -
* LED tail lights 12 / 24 V
* 15-pole power socket
----General components:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour marking on the sides and rear
* Side impact protection
* Plastic quarter fender with splash guard
* Plastic impact protection buffer at the rear
* Foldable A-frame sign at the rear
----Loading area:
* Main frame with raised outer frame for guiding the roll-off containers
* Sheet steel floor with recesses for the rollers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-point clamping locking system and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welded bead as anti-slip coating in the track area of the ramp
Bdjdpfx Aezihciok Aoh
* Mechanical support legs at the rear
----Load securing:
* 1 pair of 10-ton UVV lashing rings at the front on the end wall support
* 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame
* 4 x 2-ton lashing eyes in cloverleaf design on each side
* 4 x 8-ton lashing brackets embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for vehicles with rubber tires and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* but the drawbar, axles and air tank are painted in a black tone
----Information:
* Vehicle has full manufacturer's warranty until 03/2027
* Errors and prior sale are subject to change
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery time:
* Available for immediate delivery from Egestorf near the A7
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
* 2 in 1 = for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
----Drawbar:
* Curved drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment system instead of drawbar spring
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation -
* LED tail lights 12 / 24 V
* 15-pole power socket
----General components:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour marking on the sides and rear
* Side impact protection
* Plastic quarter fender with splash guard
* Plastic impact protection buffer at the rear
* Foldable A-frame sign at the rear
----Loading area:
* Main frame with raised outer frame for guiding the roll-off containers
* Sheet steel floor with recesses for the rollers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-point clamping locking system and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welded bead as anti-slip coating in the track area of the ramp
Bdjdpfx Aezihciok Aoh
* Mechanical support legs at the rear
----Load securing:
* 1 pair of 10-ton UVV lashing rings at the front on the end wall support
* 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame
* 4 x 2-ton lashing eyes in cloverleaf design on each side
* 4 x 8-ton lashing brackets embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for vehicles with rubber tires and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* but the drawbar, axles and air tank are painted in a black tone
----Information:
* Vehicle has full manufacturer's warranty until 03/2027
* Errors and prior sale are subject to change
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery time:
* Available for immediate delivery from Egestorf near the A7
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
172 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Egestorf
2.751 km
مقطورة رول آف
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
ناجح
تم إرسال رسالتك.
إعلان صغير
Andelst
2.471 km
الهيكل مع كابينة السائق
ScaniaR540 NGS 8X2 CHASSIS NIEUW/NEUE/NEW FULL OPTION...
ScaniaR540 NGS 8X2 CHASSIS NIEUW/NEUE/NEW FULL OPTION...
ناجح
تم إرسال رسالتك.
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
ناجح
تم إرسال رسالتك.
إعلان صغير
Egestorf
2.751 km
مقطورة رول آف
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
ناجح
تم إرسال رسالتك.
إعلان صغير
Burghaun
2.520 km
رافعة تلسكوبية
MagniTH 3.6-D5/D / 3to - 5,8m / 75PS
MagniTH 3.6-D5/D / 3to - 5,8m / 75PS
ناجح
تم إرسال رسالتك.
إعلان صغير
Andelst
2.471 km
الهيكل مع كابينة السائق
ScaniaR540 NGS 8X2 CHASSIS NIEUW/NEUE/NEW FULL OPTION...
ScaniaR540 NGS 8X2 CHASSIS NIEUW/NEUE/NEW FULL OPTION...
ناجح
تم إرسال رسالتك.
إعلان صغير
Fürth
2.386 km
مكدس ذراع تلسكوبي
DIECIRUNNER 40.13 TURBO 4x4x4 - 12.4 m / 4 t.
DIECIRUNNER 40.13 TURBO 4x4x4 - 12.4 m / 4 t.
ناجح
تم إرسال رسالتك.
إعلان صغير
Legden
2.442 km
رافعة تلسكوبية
DIECIICARUS 50.18 MVX 30 Teleskoplader m. Korb
DIECIICARUS 50.18 MVX 30 Teleskoplader m. Korb
ناجح
تم إرسال رسالتك.
إعلان صغير
Karlstein am Main
2.431 km
مقطورة نصف منخفضة
Müller-MitteltalTS 3 RM ML 30.0 hydr. Rampen Lenkachse
Müller-MitteltalTS 3 RM ML 30.0 hydr. Rampen Lenkachse
ناجح
تم إرسال رسالتك.
نقرة خروج
Calbe
2.712 km
قطعة غيار
LSB StahlbauSCHNELLWECHSLER
LSB StahlbauSCHNELLWECHSLER
تم حذف إعلانك بنجاح
حدث خطأ




























































































































































































































































