مقطورةMÜLLER-MITTELTAL
KWH 9,9 ML Kabeltransport Anhänger m. Diesel Mot
مقطورة
MÜLLER-MITTELTAL
KWH 9,9 ML Kabeltransport Anhänger m. Diesel Mot
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
39.999 €
(47.599 € إجمالي)
سنة الصنع
2026
الحالة
مستعمل
الموقع
Bobenheim - Roxheim 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
39.999 €
(47.599 € إجمالي)
- موقع البائع:
- Auf dem Wörth 2 - 4, 67240 Bobenheim - Roxheim, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 6.800 كجم
- الوزن الإجمالي:
- 9.900 كجم
- تكوين المحور:
- محور واحد
- التسجيل الأول:
- 06/2026
تفاصيل العرض
- معرّف الإعلان:
- A219-16-043
- تحديث:
- آخر مرة في 12.06.2026
وصف
Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine
* KWH 9,9 ML
* Drum brake braking system EBS 2S/2M
* BPW axles
* Leaf spring suspension, parabolic spring
* Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights
* Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm)
* Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel
* Chassis made of torsionally rigid square tubes and cross members
* Plastic toolbox
* LED lighting
* Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms
* Support arm ends with clamping device for securing the drum shaft
* Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock
* Steel drum shaft, 76 mm diameter, with centering and rotatable ends
* With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible
* Motor-hydraulic pull and push cylinders with load-holding valve
* Control valve with automatic zero position and pressure relief valve
* Connectors, hoses, and pipes of the hydraulic system in NW 13
* Required oil consumption approx. 10 liters
* Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive
* Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar)
* Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit
Pjdpfey R Ipnex Apvogn
* Cover as weather protection, hot-dip galvanized without topcoat
* Tires 315/80 R22.5
Subject to prior sale and errors!
Sale exclusively subject to our general terms and conditions.
Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim.
Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
* KWH 9,9 ML
* Drum brake braking system EBS 2S/2M
* BPW axles
* Leaf spring suspension, parabolic spring
* Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights
* Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm)
* Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel
* Chassis made of torsionally rigid square tubes and cross members
* Plastic toolbox
* LED lighting
* Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms
* Support arm ends with clamping device for securing the drum shaft
* Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock
* Steel drum shaft, 76 mm diameter, with centering and rotatable ends
* With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible
* Motor-hydraulic pull and push cylinders with load-holding valve
* Control valve with automatic zero position and pressure relief valve
* Connectors, hoses, and pipes of the hydraulic system in NW 13
* Required oil consumption approx. 10 liters
* Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive
* Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar)
* Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit
Pjdpfey R Ipnex Apvogn
* Cover as weather protection, hot-dip galvanized without topcoat
* Tires 315/80 R22.5
Subject to prior sale and errors!
Sale exclusively subject to our general terms and conditions.
Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim.
Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2016
76 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 6239 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ










































