مقطورة نصف منخفضة

MÜLLER-MITTELTAL 3- achs Sattel.-Luft-Lenk,hydr. Rampe mit Gummi

* TS 3 Profile 30.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes

----Axles:

* 3 x 11 t BPW Eco Plus axles
* Rear axle is steering with electro-pneumatic steering lock

----Suspension:

* Air suspension with lift and lower function, as well as RtR valve

----Electrics / Lighting:

* TPMS (Tire Pressure Monitoring System)
* Smartboard control box mounted on the trailer as an infotool, with pressure sensors for total axle load indication
* 15-pin power connector
* LED lighting system 12 / 24V
* Removable LED beacon, rear left

----General Attachments:

* Side underrun protection
* Support winds at the front and mechanical swing-down supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder mounted on the right side under the chassis

----Low-loader Platform:

* Saddle platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with folding lid
* 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable on the sides of the saddle platform
* Rear wall insert, 150 mm high
* Rear slope on the saddle platform towards the low bed, approx. 700 mm long
* Saddle platform with 50 mm wooden planks and low bed platform with 60 mm wooden planks
* Tread plate over the axles

----Widenings:

* 8 x mechanical folding widenings up to a total width of 3 meters, except at the rear slope (widening planks included, with storage on the saddle platform)
* Mechanically adjustable warning sign packages at front and rear

----Load Securing (Lashing Package):

* On the saddle platform: 2 x 6.3 t lashing points each, plus 3 x 5 t lashing bars on each side in the outer frame
* On the low bed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t lashing rings, foldable and lowerable, integrated in the outer frame
* Each side with 2 x 6.4 t lashing eyes plus 1 lashing ring at the rear in the excavator arm trough
* 2 x container locks directly after the neck on the low bed platform

----Excavator Arm Trough:

* Continuous trough for excavator arm from end of last rigid axle over the steering axle up to the rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm

----Access Ramps:

* Mechanically one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way control block for later customer-side retrofit of hydraulic ramp shifting
* The outer board on the ramp consists of 50 mm hardwood
* Ladder cleats on the outer frame of the ramp as well as on the approach slope
* Rubber matting on the ramp and approach slope

----Hydraulics:

* Hydraulic flow divider in trailer (for hydraulic pump performance in truck above 40 l up to 120 l/min)

----Loading Dimensions:

* Saddle platform loading area: approx. 3,935 x 2,480 mm
* Low bed loading area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm approach slope)

----Coupling Height:

* Approx. 1,220 mm (suitable for 2- and 3-axle tractor units)

----Painting:

* Chassis, ramps, rear folding supports, and widening consoles hot-dip galvanized
Kjdpfxoy Ngzye Ah Djdn
* Axles, support winds, air tanks painted black
* Vehicle is fully hot-dip galvanized

----Info:

* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images may contain equipment not included with the offered vehicle

----Delivery Time:

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.