مقطورة نصفية قاذفة

System Trailers LPRS18

Dimensions and legally permissible weights:
Internal length 11,105 mm
Internal width 2,480 mm
Total width 2,550 mm
Turning radius 2,040 mm
Neck beam height 160 mm
Coupling height 1,135 mm
Total height 4,040 mm
Internal height 2,650 mm
Side loading height 2,600 mm
Kingpin load 12,000 kg
Axle load 18,000 kg
Total permissible weight 30,000 kg

Chassis frame:
Flat chassis frame with 2 main beams from a single profile, connected by interlocking U-profile cross members approx. every 430 mm. Rear cross member located 200 mm from the end for reinforcement with forklift loading. Edge of U-profile 140.100.3 mm with V-groove.

Coupling section:
Detachable 2" kingpin in 8 mm thick coupling plate. Welded-on sliding plate, extended forward to protect light/air connections.

Landing gear:
Maintenance-free landing legs, Jost Modul type, with 2 speeds and footplates.

Gsdpfxoytbt Re Afgjip
Axle and suspension: Tridex steering
SAF air suspension set with 2 rigid, low-maintenance Modul axles and 1 TrideX steered axle, technical load capacity 9,000 kg, with disc brakes, automatic brake adjusters, and lift/lower valve.

Brake system:
Wabco load-dependent dual-line braking system with 2 ISO connections and spring brake cylinders. Wabco 2-channel electronic EBS system type 2S/2M with integrated RSS.

Wheels:
4 steel rims 22.5 x 7.50 (hub centering) with tires 385/65 R 22.5.

Lighting and markers:
Electrical system 24 V, 7-pin, with Aspöck wiring and lighting, including:
- 2 combination rear lamps, Ecopoint 7-chamber type
- 2 white Flatpoint width marker lights at the front
- 2 x 3 yellow LED side marker lights, Flatpoint type
- 2 red/white/orange width marker lamps, Superpoint II type, on rubber stalks at the rear
- 2 number plate lights, Regpoint type
- 1 ISO-N and 1 ISO-S 7-pin sockets
- 1 ISO 12098 15-pin socket
- 1 ISO 7638 7-pin EBS socket
- 2 work lights

Wheel guards:
Equipped with 4 semi-circular plastic mudguards, with ExSpray anti-spray mudflaps with logo.

Floor:
30 mm thick anti-slip floor.

Front bulkhead:
Detachable steel bulkhead frame. 300 x 4 mm impact plate, welded on the inside to the front sill.

Rear portal:
Steel rear portal with 2 foamed panel rear doors, each with 2 built-in locking rods (handles under the doors) and a vertically sliding rear bar, 120 mm high. Door retainers on both sides.

Stakes:
On both sides, 2 freely movable sliding stakes with board holders and 4 rows of wooden boards.

Sliding roof:
Fixed roof.

Sliding curtains:
Freight-type sliding curtains made from high-grade PVC tarpaulin, 900 g/m². Approx. every 600 mm, a vertical tension strap with stainless steel buckle and galvanized hook. The curtains can be horizontally tensioned at the front and rear using a tension mechanism. Curtains run with nylon rollers in the aluminum roof rails.

Accessories:
Fixed steel rear bumper. Aluminum side protection. Steel impact strips at the rear. B-sticker. 60 km/h sticker. Lift axle.

Included:
D'hollandia tail lift, 2,000 kg, 2,000 mm platform.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.