مقطورة منخفضة التحميل
MAX TRAILER 300
مقطورة منخفضة التحميل
MAX TRAILER 300
سعر ثابت دون ضريبة القيمة المضافة
38.600 €
(46.320 € إجمالي)
الحالة
جديد
الموقع
Marz 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
38.600 €
(46.320 € إجمالي)
- موقع البائع:
- Bundesstr. 9, 7221 Marz, النمسا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 16.390 كجم
- الوزن الإجمالي:
- 21.000 كجم
- تكوين المحور:
- محورين
- العرض الكلي:
- 2.480 مم
- الارتفاع الكلي:
- 860 مم
- معدات:
- نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف القائمة:
- A213-65-452
- الرقم المرجعي:
- MAX300-2A
- التحديث الأخير:
- في ٠٣.٠٣.٢٠٢٦
الوصف
MAX Trailer 300 NEW | 7.0 m Load Area | 16.4 t Payload | Ramps | from €38,600
New vehicle – individually configurable to your application.
Compact and robust low-loader trailer for the safe transport of machinery, equipment, and vehicles.
Designed for high payload, easy handling, and cost-effective use in daily operations.
Highlights
• Approx. 16,390 kg payload
• 7,000 mm load area length
• Rear bevel for easy driving on
• Manually adjustable aluminum ramps
• Ramp load capacity up to 24,000 kg per pair
• BPW axles with air suspension
• EBS braking system
• Compact dimensions – ideal for construction sites & service operations
Technical Data
• Gross weight: 21,000 kg
• Unladen weight approx.: 4,610 kg (±3%)
• Payload approx.: 16,390 kg
• Load area length: 7,000 mm
• Overall width: 2,480 mm
• Loading height at max. load: approx. 860 mm
• Coupling heights: 700 / 775 / 850 mm
• Max. speed: 80 km/h
Standard Equipment
• Hardwood loading floor (approx. 38 mm)
• Tread plate covering over axles
• Lashing points up to LC 5,000 daN and flush-mounted lashing rings in the frame
• Cut-outs in the outer frame for tie-down straps
• BPW axles, air-suspended, drum brake with lift/lower function
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
• Tire pressure monitoring system TPMS (ECE R141)
Bcsdpfx Aoypa Apjb Eow
Included options / accessories
• Drawbar approx. 1,750 mm with Ø 50 mm towing eye
• Galvanized steel front wall approx. 400 mm
• Spare wheel with holder on drawbar
• Mechanical support leg at front
• Galvanized folding supports under the rear slope
• European rear reflective plates
• White reflective tape on sides and rear
• Rotating beacon holder at rear
• Holders for warning signs including socket
• Mud flaps with MAX logo
• Additional license plate holder rear right
• Manual & documentation on USB stick
Further equipment and individual customization available at any time – we configure your vehicle exactly to your requirements.
Sample photo. Actual equipment may vary depending on configuration.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
New vehicle – individually configurable to your application.
Compact and robust low-loader trailer for the safe transport of machinery, equipment, and vehicles.
Designed for high payload, easy handling, and cost-effective use in daily operations.
Highlights
• Approx. 16,390 kg payload
• 7,000 mm load area length
• Rear bevel for easy driving on
• Manually adjustable aluminum ramps
• Ramp load capacity up to 24,000 kg per pair
• BPW axles with air suspension
• EBS braking system
• Compact dimensions – ideal for construction sites & service operations
Technical Data
• Gross weight: 21,000 kg
• Unladen weight approx.: 4,610 kg (±3%)
• Payload approx.: 16,390 kg
• Load area length: 7,000 mm
• Overall width: 2,480 mm
• Loading height at max. load: approx. 860 mm
• Coupling heights: 700 / 775 / 850 mm
• Max. speed: 80 km/h
Standard Equipment
• Hardwood loading floor (approx. 38 mm)
• Tread plate covering over axles
• Lashing points up to LC 5,000 daN and flush-mounted lashing rings in the frame
• Cut-outs in the outer frame for tie-down straps
• BPW axles, air-suspended, drum brake with lift/lower function
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
• Tire pressure monitoring system TPMS (ECE R141)
Bcsdpfx Aoypa Apjb Eow
Included options / accessories
• Drawbar approx. 1,750 mm with Ø 50 mm towing eye
• Galvanized steel front wall approx. 400 mm
• Spare wheel with holder on drawbar
• Mechanical support leg at front
• Galvanized folding supports under the rear slope
• European rear reflective plates
• White reflective tape on sides and rear
• Rotating beacon holder at rear
• Holders for warning signs including socket
• Mud flaps with MAX logo
• Additional license plate holder rear right
• Manual & documentation on USB stick
Further equipment and individual customization available at any time – we configure your vehicle exactly to your requirements.
Sample photo. Actual equipment may vary depending on configuration.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
تقديم الطلب
الهاتف & فاكس
+43 5338 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ








