مقطورة نصفية مفتوحة مع قماش مشمع

KRONE SD Plane Mega Edscha Hubdach 2x Liftachse

Krone SD Curtain Sider Mega Edscha Lifting Roof 2x Lift Axle (1st & 3rd axle) Multilock Outer Frame

Perm. total weight: 36,000 kg
Unladen weight: 6,196 kg
Payload: 29,804 kg
Fifth wheel height unladen: approx. 985 mm
BPW axles
Lift axle on 1st and 3rd axle
Air suspension
Disc brakes
Edscha sliding roof
Lifting roof
Hydraulic lifting roof with 500 mm total lift, can be raised separately at each of four corner posts
Reinforced curtain sliding tarp
Fodpfx Afox E Ib To Eepr
Curtain sliding tarp on both right and left sides
Rear portal doors
Side underrun protection left, right and rear
2x landing gear crank supports
Access ladder rear right
Toolbox left
Toolbox right
Forklift accessible
Steel ram protection buffers
Multilock outer frame
ABS
EBS
ALB
DIN EN 12642 Code XL
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm
Loading area (LxWxH): 13,571 x 2,480 x 3,006 mm
External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm
Clear loading height at rear portal: 2,785 mm
Rear portal clear width: 2,480 mm (internal)
Tyres: 435/50R19.5 on ALCOA aluminium rims
Tire tread depth left front: 7 mm
Tire tread depth left center: 9 mm
Tire tread depth left rear: 7 mm
Tire tread depth right front: 14 mm
Tire tread depth right center: 9 mm
Tire tread depth right rear: 7 mm

Additional equipment:
Type: SD
Suitable for tractor unit (ISO 1726 limited – tractor data required!)
Kingpin to center of support approx. 2,720 mm
Fifth wheel height unladen: approx. 985 mm
Longitudinal double-T and central beams, as well as outer frame, welded with cross members and outriggers
Multilock outer frame, universal load securing options every 100 mm
Front chassis height: 80 mm (incl. floor and fifth wheel plate)
2" kingpin
Rear underrun protection as per EC directive
Side underrun protection as per EC directive
Rear sliding step ladder
Door retainers
Two mechanical landing gears, 2 x 12 t, semi-round with ground plate
Landing gear operation single-sided, on front right
3 axles, each 9,000 kg load capacity
BPW axles, 19.5", with air suspension (total lift 260 mm) and disc brakes (ET 120)
Brake disc diameter: 370 mm
With lifting and lowering device, incl. automatic driving level reset
Electronically controlled load-dependent automatic lift axle control for 1st axle
Electronically controlled load-dependent automatic lift axle control for 3rd axle
Manual operation at the control console for forced lifting (starting aid according to Directive 97/27/EC) and forced lowering via rotary switch
Note: reduced ground clearance in the area of the lift axle!
Lift axle actuation sequence: 3rd axle lifts first / lowers last
Plastic wheel arches (fenders)
Spray suppression as per EC directive
Brake system as per ECE Regulation 13 (incl. vehicle stability function)
Spring-loaded parking brake
Brake line connections front approx. 675 mm above platform
Diagnostics via ISO7638 connection (EBS power cable)
Standard air connections ISO 1728 (Palm)
Brake system brand: Wabco
EBS system 2S/2M, 2 sensors at one axle
Lighting and signaling system ECE 48
2 LED license plate lights
2 outline marker lights with rubber arm, LED version
LED side marker lights with direction indicator (blinker function)
Electrical cable connections at front approx. 450 mm above platform
24 Volt, front with 7-pin socket DIN ISO 1185
7-pin socket DIN ISO 3731 at front for additional functions
Also front: 15-pin socket DIN ISO 12098
Multifunction rear lights
Steel ram corners at rear

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.