مقطورة نصفية مفتوحة مع قماش مشمع

KRONE SD Plane Mega Edscha Hubdach 2x Liftachse

Krone SD Curtain Mega Edscha Lifting Roof 2x Lift Axle (1st + 3rd Axle) Multilock Outer Frame

Permissible total weight: 36,000 kg
Unladen weight: 6,196 kg
Payload: 29,804 kg
Fifth wheel height unladen: approx. 985 mm
BPW axles
Lift axle: 1st and 3rd axles
Air suspension
Disc brakes
Edscha sliding roof
Lifting roof
Hydraulic lifting roof with a total stroke of 500 mm, liftable separately at each of the 4 corner posts
High-visibility tarpaulin, sliding curtain
Sliding curtain on both right and left sides
Swing doors
Side and rear underrun protection
2x telescopic landing legs
Rear right access ladder
Storage box left
Storage box right
Forklift accessible
Metal bumpers
Multilock outer frame
Fsdpfex E Ib Hjx Af Ejpr
ABS
EBS
ALB
DIN EN 12642 Code XL
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm
Loading area (LxWxH): 13,561 x 2,480 x 3,003 mm
External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm
Clear rear portal height: 2,785 mm
Clear rear portal width: 2,480 mm (internal)
Tyres: 435/50R19.5 on ALCOA alloy rims
Tread depth left front: 7 mm
Tread depth left middle: 10 mm
Tread depth left rear: 5 mm
Tread depth right front: 8 mm
Tread depth right middle: 9 mm
Tread depth right rear: 6 mm

Additional equipment:
Type: SD
Suitable for tractor unit (limited to ISO 1726 – engine data required!)
King pin to centre of support device: approx. 2,720 mm
Fifth wheel height unladen: approx. 985 mm
Double-T longitudinal beams and center rails as well as outer frame welded with crossbeams and outriggers
Multilock outer frame: universal load securing points every 100 mm
Front frame height: 80 mm (incl. floor and fifth wheel plate)
2” king pin
Rear underrun guard according to EC directive
Side guard according to EC directive
Rear sliding access ladder
Door retainers
Two mechanical landing gears, 2 x 12 t, semi-circular with base plate
Landing gear operation on one side, FR-right
3 axles with 9,000 kg load capacity each
BPW axles, 19.5", with air suspension (total stroke 260 mm) and disc brakes (ET 120)
Brake disc diameter: 370 mm
With lift and lower function, incl. automatic ride height reset
Load-dependent, fully automatic electronic lift axle control for 1st axle
Load-dependent, fully automatic electronic lift axle control for 3rd axle
Manual function at control console for forced lifting (starting aid as per Directive 97/27/EC) and forced lowering via rotary switch
Attention: Reduced ground clearance in the area of the lift axle!
Lift axle operation sequence: 3rd axle lifts first / lowers last
Plastic wheel covers (mudguards)
Splash protection according to EC directive
Brake system according to ECE regulation 13 (incl. vehicle stabilization function)
Spring-loaded parking brake
Brake line connections at the front approx. 675 mm above platform
Diagnostics via ISO7638 connector (EBS supply cable)
Standard air connections ISO 1728 (palm couplings)
Brake system manufacturer: Wabco
EBS system, 2S/2M, 2 sensors on one axle
Lighting and signal installation ECE 48
2 LED license plate lamps
2 LED outline marker lamps with rubber arm
LED side marker lights with indicator function
Electrical cable connections front approx. 450 mm above platform
24V, front with 7-pin socket DIN ISO 1185
7-pin socket DIN ISO 3731 front, for additional functions
Also front 15-pin socket DIN ISO 12098
Multifunction rear lights
Steel ram protection corners rear

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.