مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
سعر ثابت دون ضريبة القيمة المضافة
29.900 €
(35.581 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
29.900 €
(35.581 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.800 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
تفاصيل العرض
- معرّف القائمة:
- A204-85-575
- الرقم المرجعي:
- 62471
- التحديث الأخير:
- في ٢١.٠١.٢٠٢٦
الوصف
* ETÜ-TA-R 14.4:
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal – without installation required on truck side
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
Cpjdpexvgriefx Ac Nsu
* Front support winch
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm on the right front exterior of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Provision in front of the front wall for retrofitting container locks
* Bolted 400 mm smooth sheet front wall
* Bolted rear stanchions
* Drop sides with spring assists
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t recessed lashing rings possible every 600 mm
* In each front and rear corner, 1 x 6.3 t lashing point
* Various holes in the front and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grating drive-on ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance)
* Hydraulic flow divider in the trailer (for truck hydraulic output above 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical drop supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in a black tone
* Drop sides painted RAL 2011 deep orange
* Side panels available in a RAL color of your choice for an additional charge
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal – without installation required on truck side
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
Cpjdpexvgriefx Ac Nsu
* Front support winch
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm on the right front exterior of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Provision in front of the front wall for retrofitting container locks
* Bolted 400 mm smooth sheet front wall
* Bolted rear stanchions
* Drop sides with spring assists
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t recessed lashing rings possible every 600 mm
* In each front and rear corner, 1 x 6.3 t lashing point
* Various holes in the front and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grating drive-on ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance)
* Hydraulic flow divider in the trailer (for truck hydraulic output above 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical drop supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in a black tone
* Drop sides painted RAL 2011 deep orange
* Side panels available in a RAL color of your choice for an additional charge
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.752 km
مقطورة مع منصة عمل
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
تم حذف إعلانك بنجاح
حدث خطأ






























































