مقطورة قلابة ثلاثية الاتجاهاتMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Anlegerampen
مقطورة قلابة ثلاثية الاتجاهات
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Anlegerampen
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
25.750 €
(30.642 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
25.750 €
(30.642 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 8.600 كجم
- الوزن الإجمالي:
- 11.900 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.000 مم
- عرض مساحة التحميل:
- 2.420 مم
- ارتفاع مساحة التحميل:
- 500 مم
تفاصيل العرض
- معرّف الإعلان:
- A186-01-846
- رقم المرجع:
- 6138
- تحديث:
- آخر مرة في 16.07.2026
وصف
* KA-TA-R 11.9 Masterline:
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 ton BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* LED lighting
* 15-pole electrical connector
----General components:
Gkodpfxov Dz N As Agyea
* Tool box made of galvanized sheet steel on the right side
* Bolted underrun protection
* Plastic quarter fenders
* Jost mechanical front support legs
* 2 mechanical, hot-dip galvanized folding support legs at the rear
----Tipping bridge:
* Net hooks on the side and at the rear in the bearings of the central locking system, as well as 3 pieces on the outside of the front wall
* Hot-dip galvanized chassis
* Steel 3-sided tipping body
* Continuous side walls without a center rail, foldable with side board spring supports
* Folding tailgate and pivoting over a manual central locking system
* Hot-dip galvanized, bolted rear rail
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load securing:
* 1 x 5 ton recessed and foldable lashing points in each corner
* As well as 4 x 3 ton lashing points on each side, recessed in the outer frame and foldable
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for vehicles with rubber tires and tracked vehicles
* Lockable storage compartment at the rear under the loading area, integrated into the chassis
----Tires:
* Tires 235/75 R 17.5
----Painting:
* Axles, springs, air tanks, drawbar and support legs painted in a black tone
* Side board painted in RAL 9010 pure white
* Painting of the side walls in an RAL color possible at an extra charge
* Floor and front wall hot-dip galvanized
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approximately week 45/2026
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 ton BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* LED lighting
* 15-pole electrical connector
----General components:
Gkodpfxov Dz N As Agyea
* Tool box made of galvanized sheet steel on the right side
* Bolted underrun protection
* Plastic quarter fenders
* Jost mechanical front support legs
* 2 mechanical, hot-dip galvanized folding support legs at the rear
----Tipping bridge:
* Net hooks on the side and at the rear in the bearings of the central locking system, as well as 3 pieces on the outside of the front wall
* Hot-dip galvanized chassis
* Steel 3-sided tipping body
* Continuous side walls without a center rail, foldable with side board spring supports
* Folding tailgate and pivoting over a manual central locking system
* Hot-dip galvanized, bolted rear rail
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load securing:
* 1 x 5 ton recessed and foldable lashing points in each corner
* As well as 4 x 3 ton lashing points on each side, recessed in the outer frame and foldable
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for vehicles with rubber tires and tracked vehicles
* Lockable storage compartment at the rear under the loading area, integrated into the chassis
----Tires:
* Tires 235/75 R 17.5
----Painting:
* Axles, springs, air tanks, drawbar and support legs painted in a black tone
* Side board painted in RAL 9010 pure white
* Painting of the side walls in an RAL color possible at an extra charge
* Floor and front wall hot-dip galvanized
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approximately week 45/2026
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
171 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
إعلان صغير
Egestorf
2.751 km
مقطورة قلابة ثلاثية الاتجاهات
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
إعلان صغير
Egestorf
2.751 km
مقطورة قلابة ثلاثية الاتجاهات
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
تم حذف إعلانك بنجاح
حدث خطأ









































































































