مقطورة قلابة ثلاثية الاتجاهاتMÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
مقطورة قلابة ثلاثية الاتجاهات
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
سعر ثابت دون ضريبة القيمة المضافة
26.500 €
(31.535 € إجمالي)
سنة الصنع
2024
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
26.500 €
(31.535 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 8.780 كجم
- الوزن الإجمالي:
- 11.900 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.000 مم
- عرض مساحة التحميل:
- 2.420 مم
- ارتفاع مساحة التحميل:
- 500 مم
تفاصيل العرض
- معرّف القائمة:
- A128-69-375
- الرقم المرجعي:
- 6013
- التحديث الأخير:
- في ٠٧.٠١.٢٠٢٦
الوصف
* KA-TA-R 11.9 Masterline:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Side-mounted toolbox made of galvanized sheet steel, on the right
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* Bolted underrun protection with LED tail lights
----Tipper Body:
* Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall
* Hot-dip galvanized chassis
* Steel pal. three-way tipper body, fully galvanized
* Continuous side walls, without central stanchion, foldable, with drop side spring supports
Ffjdpfx Aspk D D Uoc Eot
* Tailboard can be folded down and used as a swinging gate, with manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side
* 4 mm steel floor, with slot rail at the rear for loading ramps
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear
----Tyres:
* Tyres 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle is hot-dip galvanized
----Information:
* Body reinforced, load securing certificate according to EN 12642 XL
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
----Delivery time:
* Immediately available ex Egestorf on the A7
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Side-mounted toolbox made of galvanized sheet steel, on the right
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* Bolted underrun protection with LED tail lights
----Tipper Body:
* Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall
* Hot-dip galvanized chassis
* Steel pal. three-way tipper body, fully galvanized
* Continuous side walls, without central stanchion, foldable, with drop side spring supports
Ffjdpfx Aspk D D Uoc Eot
* Tailboard can be folded down and used as a swinging gate, with manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side
* 4 mm steel floor, with slot rail at the rear for loading ramps
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear
----Tyres:
* Tyres 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle is hot-dip galvanized
----Information:
* Body reinforced, load securing certificate according to EN 12642 XL
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
----Delivery time:
* Immediately available ex Egestorf on the A7
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ























































