مقطورة مع منصة عملMÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
سعر ثابت دون ضريبة القيمة المضافة
34.950 €
(41.590 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
34.950 €
(41.590 € إجمالي)
- الموقع:
- Eichenstich 12, 21272 Egestorf, Deutschland

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.400 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.500 مم
- عرض مساحة التحميل:
- 2.420 مم
- ارتفاع مساحة التحميل:
- 500 مم
تفاصيل العرض
- معرّف القائمة:
- A162-17-593
- الرقم المرجعي:
- 62651a
- التحديث الأخير:
- في ١٤.٠١.٢٠٢٦
الوصف
* ETK-TA-R 14.4:
----Brakes:
* EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
Gsdpfxetr St Hs Agroil
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical support winch at the front
* Two mechanical foldable supports at the rear
* Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
----Chassis:
* Main frame made from fine-grain steel
----Tipper Body:
* Net hooks on the sides and rear at the central locking mounts, plus two at the front wall
* Steel pallet two-way tipper body, fixed front wall from smooth sheet, continuous drop sides without central stanchions, foldable with drop side spring lifter, and swinging with manual central locking
* Rear stanchions bolted
* Steel rear wall inserted in front of the ramps
* One 5 t lashing point at each corner, four 3 t lashing rings recessed into the side outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grid driving ramps with aluminium tapered section, 2,150 + 1,300 mm x 600 mm (manually adjustable down to 80 mm)
----Coating:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and driving ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Drop sides and tipper body in RAL 9010 pure white
* Painting of the side walls and tipper body in an RAL color available at extra cost
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available from week 07/2026
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Brakes:
* EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
Gsdpfxetr St Hs Agroil
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical support winch at the front
* Two mechanical foldable supports at the rear
* Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
----Chassis:
* Main frame made from fine-grain steel
----Tipper Body:
* Net hooks on the sides and rear at the central locking mounts, plus two at the front wall
* Steel pallet two-way tipper body, fixed front wall from smooth sheet, continuous drop sides without central stanchions, foldable with drop side spring lifter, and swinging with manual central locking
* Rear stanchions bolted
* Steel rear wall inserted in front of the ramps
* One 5 t lashing point at each corner, four 3 t lashing rings recessed into the side outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grid driving ramps with aluminium tapered section, 2,150 + 1,300 mm x 600 mm (manually adjustable down to 80 mm)
----Coating:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and driving ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Drop sides and tipper body in RAL 9010 pure white
* Painting of the side walls and tipper body in an RAL color available at extra cost
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available from week 07/2026
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
تم حذف إعلانك بنجاح
حدث خطأ











































































