مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
34.950 €
(41.590 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
34.950 €
(41.590 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.400 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.500 مم
- عرض مساحة التحميل:
- 2.420 مم
- ارتفاع مساحة التحميل:
- 500 مم
تفاصيل العرض
- معرّف الإعلان:
- A162-17-602
- رقم المرجع:
- 62651
- تحديث:
- آخر مرة في 23.07.2026
وصف
* ETK-TA-R 14.4:
----Brakes:
Bsdpfxjtr Suco Aiyedf
* EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation
* 15-pole power socket
* LED tail lights
----General components:
* Mechanical support jacks at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Bolted underrun protection
* Plastic quarter fenders
----Frame:
* Main frame made of fine-grain steel
----Tipping platform:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lift and pivoting via manual central locking
* Rear rails bolted on
* Steel rear wall inserted in front of the ramps
* 1 x 5-ton lashing point in each corner, as well as 4 x 3-ton lashing eyes on each side embedded in the outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grid ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable up to 80 mm)
----Painting:
* Chassis, drawbar, rear rails, underrun protection, mechanical support jacks, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling, and support jacks painted in a black tone
* Side boards and platform painted in RAL 9010 pure white
* Painting of the side walls and tipping platform in a RAL color is possible for an extra charge
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available immediately from Egestorf
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
----Brakes:
Bsdpfxjtr Suco Aiyedf
* EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation
* 15-pole power socket
* LED tail lights
----General components:
* Mechanical support jacks at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Bolted underrun protection
* Plastic quarter fenders
----Frame:
* Main frame made of fine-grain steel
----Tipping platform:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lift and pivoting via manual central locking
* Rear rails bolted on
* Steel rear wall inserted in front of the ramps
* 1 x 5-ton lashing point in each corner, as well as 4 x 3-ton lashing eyes on each side embedded in the outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grid ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable up to 80 mm)
----Painting:
* Chassis, drawbar, rear rails, underrun protection, mechanical support jacks, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling, and support jacks painted in a black tone
* Side boards and platform painted in RAL 9010 pure white
* Painting of the side walls and tipping platform in a RAL color is possible for an extra charge
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available immediately from Egestorf
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
171 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة قلابة ثلاثية الاتجاهات
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
إعلان صغير
Schwebheim
2.483 km
مقطورة قلابة ثلاثية الاتجاهات
Müller-MitteltalTA-2 14,4 t Tandemkipper- Tieflader Breitbereifung NEUWERTIG
Müller-MitteltalTA-2 14,4 t Tandemkipper- Tieflader Breitbereifung NEUWERTIG
إعلان صغير
Gondelsheim
2.330 km
شاحنة قلابة
IVECOStralis AD 190 S / 460 6x2
IVECOStralis AD 190 S / 460 6x2
تم حذف إعلانك بنجاح
حدث خطأ



















































































