مقطورة منخفضة التحميلMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
سعر ثابت دون ضريبة القيمة المضافة
32.950 €
(39.210 € إجمالي)
سنة الصنع
2024
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
32.950 €
(39.210 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 14.550 كجم
- الوزن الإجمالي:
- 19.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A128-69-474
- الرقم المرجعي:
- 5954
- التحديث الأخير:
- في ١٦.١٢.٢٠٢٥
الوصف
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11-tonne Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height-adjustable drawbar
* Jost support winch at the front
* External foldable support legs at the rear
* Toolbox made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated)
* Side underride protection
Iodpfx Ajpk D Ncebnetr
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drill rig transport on chassis - loading height + 20 mm
* 50 mm softwood flooring in clamped design
* Fixture in front of headboard for retrofitting container locks
* Bolted headboard made from smooth sheet metal
* Drop-down side panels made from trapezoidal-profile steel with board side spring assist
* Rear steel panel can be slid between the ramps - storage bracket inside in front of the headboard when not in use
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* In the front and rear corners 1 x 10 t lashing point each; various holes for 1.2 t lashing points in the front and rear carrier
* One-piece mechanical grating loading ramps with spring system for single-person operation approx. 2,750 x 620 mm (can be collapsed down to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, headboard, tailgate, rear foldable supports, and ramps hot-dip galvanized
* Axles, springs, air tank, and support winch painted black
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Side panel painting in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11-tonne Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height-adjustable drawbar
* Jost support winch at the front
* External foldable support legs at the rear
* Toolbox made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated)
* Side underride protection
Iodpfx Ajpk D Ncebnetr
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drill rig transport on chassis - loading height + 20 mm
* 50 mm softwood flooring in clamped design
* Fixture in front of headboard for retrofitting container locks
* Bolted headboard made from smooth sheet metal
* Drop-down side panels made from trapezoidal-profile steel with board side spring assist
* Rear steel panel can be slid between the ramps - storage bracket inside in front of the headboard when not in use
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* In the front and rear corners 1 x 10 t lashing point each; various holes for 1.2 t lashing points in the front and rear carrier
* One-piece mechanical grating loading ramps with spring system for single-person operation approx. 2,750 x 620 mm (can be collapsed down to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, headboard, tailgate, rear foldable supports, and ramps hot-dip galvanized
* Axles, springs, air tank, and support winch painted black
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Side panel painting in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ














































