مقطورة مع منصة عملMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
32.950 €
(39.210 € إجمالي)
سنة الصنع
2024
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
32.950 €
(39.210 € إجمالي)
- الموقع:
- Eichenstich 12, 21272 Egestorf, Deutschland

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 14.550 كجم
- الوزن الإجمالي:
- 19.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف الإعلان:
- A128-69-369
- رقم المرجع:
- 59541
- تحديث:
- آخر مرة في 11.06.2026
وصف
ETÜ-TA-R 19.0
---- Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
---- Axles:
* 2 x 11 t Gigant axles
---- Suspension:
* Air suspension with manual lowering at the rear
---- Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flanged tow eye and height-adjustable drawbar
---- Electrical / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
---- General Attachments:
* Jost landing gear at the front
* External folding support legs at the rear
* Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated)
* Side underrun protection
* Plastic quarter mudguards
---- Low Loader Platform:
* Reinforcement package for drilling rig transport on chassis - loading height + 20 mm
* 50 mm softwood floor in clamped design
* Provision in front of the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet steel
* Side walls made of trapezoidal-profiled steel, foldable with tailgate spring assist
* Rear steel panel, can be inserted between the ramps - storage fixture in front of the front wall when not in use
* Rear stakes bolted
---- Load Securing:
* Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 10 t lashing ring each at the front and rear corners, various bore holes for 1.2 t lashing available in front and rear crossmembers
---- Ramps:
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be narrowed to 20 mm apart)
* Rear ramp slope approx. 860 mm
---- Tires:
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
---- Paintwork:
* Chassis, drawbar, front wall, tailgate, rear support legs, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Side wall paintwork in RAL 9010 pure white
* Painting of side panels in any RAL color available at extra cost
---- Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
Kodpfxepk D D He Ah Djdn
---- Delivery time:
* Available immediately ex Egestorf
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
---- Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
---- Axles:
* 2 x 11 t Gigant axles
---- Suspension:
* Air suspension with manual lowering at the rear
---- Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flanged tow eye and height-adjustable drawbar
---- Electrical / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
---- General Attachments:
* Jost landing gear at the front
* External folding support legs at the rear
* Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated)
* Side underrun protection
* Plastic quarter mudguards
---- Low Loader Platform:
* Reinforcement package for drilling rig transport on chassis - loading height + 20 mm
* 50 mm softwood floor in clamped design
* Provision in front of the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet steel
* Side walls made of trapezoidal-profiled steel, foldable with tailgate spring assist
* Rear steel panel, can be inserted between the ramps - storage fixture in front of the front wall when not in use
* Rear stakes bolted
---- Load Securing:
* Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 10 t lashing ring each at the front and rear corners, various bore holes for 1.2 t lashing available in front and rear crossmembers
---- Ramps:
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be narrowed to 20 mm apart)
* Rear ramp slope approx. 860 mm
---- Tires:
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
---- Paintwork:
* Chassis, drawbar, front wall, tailgate, rear support legs, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Side wall paintwork in RAL 9010 pure white
* Painting of side panels in any RAL color available at extra cost
---- Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
Kodpfxepk D D He Ah Djdn
---- Delivery time:
* Available immediately ex Egestorf
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
170 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ














































