مقطورة مع منصة عملMÜLLER-MITTELTAL
24 to. Kombi Cont. fl.-Liftachse NEU
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
24 to. Kombi Cont. fl.-Liftachse NEU
سعر ثابت دون ضريبة القيمة المضافة
47.500 €
(56.525 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
47.500 €
(56.525 € إجمالي)
- الموقع:
- Eichenstich 12, 21272 Egestorf, DE

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 18.900 كجم
- الوزن الإجمالي:
- 24.000 كجم
- تكوين المحور:
- 3 محاور
- طول مساحة التحميل:
- 7.000 مم
- عرض مساحة التحميل:
- 2.480 مم
تفاصيل العرض
- معرّف القائمة:
- A128-69-330
- الرقم المرجعي:
- 5822a
- التحديث الأخير:
- في ١٩.١٠.٢٠٢٥
الوصف
* TRA-Kombi 24.0:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* RDÜ (tire pressure monitoring system)
* Drum brakes
* 3 x 11 t Gigant axles
* Air suspension with manual lowering at the rear
* Lifting center axle
* Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye and height adjustment device
* Tool box made from powder-coated steel and spare wheel holder with basket design, mounted on the right side
* Reflective contour tape on sides and rear
* Side underrun protection
* Plastic quarter mudguards with splash protection
* Rear plastic bumpers
* LED tail lights
* 15-pin electrical connector
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers
* Steel floor with roller depressions in the bogie area
* Suitable for roll-off containers with lengths from 5,500 to 7,000 mm
* Pneumatic 4-point container locking as well as mechanical plug-in front stops in the runner tracks
* Load certificate according to DIN 30722-1
* Transport of up to 2 skip containers with max. 10 m³ volume each possible
* Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plug-in with oscillating stops
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices to secure the skips by positive and frictional locking
* 4 cloverleaf-design lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front
Credpfjpk D Awjx Ab Isi
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Weld bead as anti-slip coating in the ramp track area
* Mechanical rear support legs
* 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear)
* Tires: 235/75 R17.5
* Laden ride height: approx. 1003 mm
* Payload: 18,900 kg
* Technical gross vehicle weight: up to 27,000 kg
* Axles, turntable, drawbar, and air tank painted black
* New vehicle without initial registration, covered by manufacturer's warranty
* Subject to errors and prior sale
* Available from week 50/2025
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* RDÜ (tire pressure monitoring system)
* Drum brakes
* 3 x 11 t Gigant axles
* Air suspension with manual lowering at the rear
* Lifting center axle
* Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye and height adjustment device
* Tool box made from powder-coated steel and spare wheel holder with basket design, mounted on the right side
* Reflective contour tape on sides and rear
* Side underrun protection
* Plastic quarter mudguards with splash protection
* Rear plastic bumpers
* LED tail lights
* 15-pin electrical connector
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers
* Steel floor with roller depressions in the bogie area
* Suitable for roll-off containers with lengths from 5,500 to 7,000 mm
* Pneumatic 4-point container locking as well as mechanical plug-in front stops in the runner tracks
* Load certificate according to DIN 30722-1
* Transport of up to 2 skip containers with max. 10 m³ volume each possible
* Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plug-in with oscillating stops
* 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices to secure the skips by positive and frictional locking
* 4 cloverleaf-design lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front
Credpfjpk D Awjx Ab Isi
* Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Weld bead as anti-slip coating in the ramp track area
* Mechanical rear support legs
* 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear)
* Tires: 235/75 R17.5
* Laden ride height: approx. 1003 mm
* Payload: 18,900 kg
* Technical gross vehicle weight: up to 27,000 kg
* Axles, turntable, drawbar, and air tank painted black
* New vehicle without initial registration, covered by manufacturer's warranty
* Subject to errors and prior sale
* Available from week 50/2025
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة رول آف
MÜLLER-MITTELTAL24 to. Kombi Cont. fl.-Liftachse NEU
MÜLLER-MITTELTAL24 to. Kombi Cont. fl.-Liftachse NEU
تم حذف إعلانك بنجاح
حدث خطأ





























































