مقطورة رول آفMÜLLER-MITTELTAL
18t. Kombi, Abroller Absetzer Tieflader, Parabel
مقطورة رول آف
MÜLLER-MITTELTAL
18t. Kombi, Abroller Absetzer Tieflader, Parabel
سعر ثابت دون ضريبة القيمة المضافة
40.900 €
(48.671 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
40.900 €
(48.671 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 13.500 كجم
- الوزن الإجمالي:
- 18.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 7.000 مم
- عرض مساحة التحميل:
- 2.480 مم
تفاصيل العرض
- معرّف القائمة:
- A104-26-946
- الرقم المرجعي:
- 5739
- التحديث الأخير:
- في ١٢.٠٨.٢٠٢٥
الوصف
* TRA-Kombi 18.0:
* Load securing package
* Wabco
* RDÜ tire pressure monitoring system
* EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* 2 x 12 t Gigant axles
* Parabolic springs
* Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system
* Toolbox made of powder-coated sheet steel, right side mounted
* Reflective contour tape, side and rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Storage box for container nets made of galvanized sheet metal approx. 960 x 300 x 400/450 mm, right side mounted
* Rear plastic anti-collision buffer
* LED tail lights
* 15-pin electrical connector
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding container rollers
* Steel floor with roller recesses in the bogie area
* When transporting roll-off containers, container lengths of 5,500 – 7,000 mm possible
* Pneumatic 4-point clamping lock as well as mechanical plug-in stops at the front of the travel path, load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a maximum volume of 10 m³ each possible
* With 8 repositionable skip stops for lateral centering, the front 4 are plug-in with pivotable end stop
* 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning devices for positive and non-positive securing of skips, 4 cloverleaf lashing brackets on each side, 1 pair of 13.4 t UVV lashing rings at the front; load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop supports
* 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear)
* 235/75 R 17.5 twin tires
* Unladen weight: 4,360 kg
* Technically permissible gross weight: 20,000 kg
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
Hodpfxsl Thwcj Ag Iew
* Available from CW 48 / 2025
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* Load securing package
* Wabco
* RDÜ tire pressure monitoring system
* EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* 2 x 12 t Gigant axles
* Parabolic springs
* Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system
* Toolbox made of powder-coated sheet steel, right side mounted
* Reflective contour tape, side and rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Storage box for container nets made of galvanized sheet metal approx. 960 x 300 x 400/450 mm, right side mounted
* Rear plastic anti-collision buffer
* LED tail lights
* 15-pin electrical connector
* Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding container rollers
* Steel floor with roller recesses in the bogie area
* When transporting roll-off containers, container lengths of 5,500 – 7,000 mm possible
* Pneumatic 4-point clamping lock as well as mechanical plug-in stops at the front of the travel path, load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a maximum volume of 10 m³ each possible
* With 8 repositionable skip stops for lateral centering, the front 4 are plug-in with pivotable end stop
* 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning devices for positive and non-positive securing of skips, 4 cloverleaf lashing brackets on each side, 1 pair of 13.4 t UVV lashing rings at the front; load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
* Weld seam as anti-slip coating in the inclined ramp area
* Mechanical rear drop supports
* 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear)
* 235/75 R 17.5 twin tires
* Unladen weight: 4,360 kg
* Technically permissible gross weight: 20,000 kg
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
Hodpfxsl Thwcj Ag Iew
* Available from CW 48 / 2025
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ














































