مقطورة منخفضة التحميلMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
سعر ثابت دون ضريبة القيمة المضافة
28.500 €
(33.915 € إجمالي)
سنة الصنع
2024
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
28.500 €
(33.915 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الإجمالي:
- 11.900 كجم
- الوزن الأقصى للحمولة:
- 8.620 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.500 مم
- عرض مساحة التحميل:
- 2.420 مم
- ارتفاع مساحة التحميل:
- 500 مم
تفاصيل العرض
- معرّف القائمة:
- A112-18-097
- الرقم المرجعي:
- 58921
- التحديث الأخير:
- في ١٠.٠٧.٢٠٢٥
الوصف
* KA-TA-R 11.9:
* 5.5-meter-long bridge completely finished in RAL 9010 white
* Tire pressure monitoring (RDÜ)
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 5.5-ton Gigant axles
* Parabolic springs with tandem compensating unit
Nodpfx Afom Angvjmjdc
* 300 mm height-adjustable, hot-dip galvanized drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical landing gears at the rear Hot-dip galvanized folding supports
* Toolbox made of galvanized sheet steel on the right side
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underride protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* Net hooks on the sides and rear in the central locking bearings, as well as 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet, 3-way tipping body
* Continuous side walls without center stanchions, foldable with side wall spring lift
* Tailgate foldable and swinging via manual central locking
* Hot-dip galvanized bolted rear stanchions
* 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing rings on each side Lashing eyes embedded in the outer frame
* 4 mm sheet steel floor
* Rear mounting rail for the docking ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tank, drawbar, and landing gear painted in a black tone
* Body color: RAL 9010 pure white
* Side walls and tipping body painted in a RAL color available for an additional charge
* Tires: 235/75R17.5
* Wheelbase: 990 mm
* New vehicle, not registered, with manufacturer's warranty
* Errors and prior sale subject to change
* Available immediately Egestorf on the A7
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* 5.5-meter-long bridge completely finished in RAL 9010 white
* Tire pressure monitoring (RDÜ)
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 5.5-ton Gigant axles
* Parabolic springs with tandem compensating unit
Nodpfx Afom Angvjmjdc
* 300 mm height-adjustable, hot-dip galvanized drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical landing gears at the rear Hot-dip galvanized folding supports
* Toolbox made of galvanized sheet steel on the right side
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underride protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* Net hooks on the sides and rear in the central locking bearings, as well as 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet, 3-way tipping body
* Continuous side walls without center stanchions, foldable with side wall spring lift
* Tailgate foldable and swinging via manual central locking
* Hot-dip galvanized bolted rear stanchions
* 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing rings on each side Lashing eyes embedded in the outer frame
* 4 mm sheet steel floor
* Rear mounting rail for the docking ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tank, drawbar, and landing gear painted in a black tone
* Body color: RAL 9010 pure white
* Side walls and tipping body painted in a RAL color available for an additional charge
* Tires: 235/75R17.5
* Wheelbase: 990 mm
* New vehicle, not registered, with manufacturer's warranty
* Errors and prior sale subject to change
* Available immediately Egestorf on the A7
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ




















































