مقطورة قلابة ثلاثية الاتجاهاتMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
مقطورة قلابة ثلاثية الاتجاهات
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
سعر ثابت دون ضريبة القيمة المضافة
28.500 €
(33.915 € إجمالي)
سنة الصنع
2024
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
28.500 €
(33.915 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 8.620 كجم
- الوزن الإجمالي:
- 11.900 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.500 مم
- عرض مساحة التحميل:
- 2.420 مم
- ارتفاع مساحة التحميل:
- 500 مم
تفاصيل العرض
- معرّف القائمة:
- A104-27-000
- الرقم المرجعي:
- 5892
- التحديث الأخير:
- في ١٣.٠١.٢٠٢٦
الوصف
* KA-TA-R 11.9:
----Brakes:
* Electronic Braking System (EBS)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equaliser unit
----Drawbar / Flange Eye:
* Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* LED tail lights
----General Attachments:
* Jost mechanical landing gear at the front
Gedpfx Agol Thx Eorjil
* Rear: 2 mechanical, hot-dip galvanised folding support legs
* Tool box made of galvanised sheet steel, mounted on the right side
* Hot-dip galvanised, bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall
* Hot-dip galvanised chassis
* 3-way tipping steel platform for pallets
* Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders
* Rear drop gate can be folded down or operated in pendulum mode via manual central locking
* Bolted, hot-dip galvanised rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of drop side extensions
* 5.5 metre-long platform
----Load Securing:
* Each corner fitted with 1 x 5 t lashing ring
* 4 x 3 t lashing rings integrated into the outer frame on each side
----Ramps:
* Rear guide rails for loading ramps
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading area at the rear, integrated into the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in a shade of black
* Platform superstructure colour: RAL 9010 pure white
* Painting of the side walls and tipping platform in an RAL colour tone available at extra cost
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex works Egestorf (A7 motorway)
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Brakes:
* Electronic Braking System (EBS)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equaliser unit
----Drawbar / Flange Eye:
* Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* LED tail lights
----General Attachments:
* Jost mechanical landing gear at the front
Gedpfx Agol Thx Eorjil
* Rear: 2 mechanical, hot-dip galvanised folding support legs
* Tool box made of galvanised sheet steel, mounted on the right side
* Hot-dip galvanised, bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall
* Hot-dip galvanised chassis
* 3-way tipping steel platform for pallets
* Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders
* Rear drop gate can be folded down or operated in pendulum mode via manual central locking
* Bolted, hot-dip galvanised rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of drop side extensions
* 5.5 metre-long platform
----Load Securing:
* Each corner fitted with 1 x 5 t lashing ring
* 4 x 3 t lashing rings integrated into the outer frame on each side
----Ramps:
* Rear guide rails for loading ramps
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading area at the rear, integrated into the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in a shade of black
* Platform superstructure colour: RAL 9010 pure white
* Painting of the side walls and tipping platform in an RAL colour tone available at extra cost
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex works Egestorf (A7 motorway)
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ




















































