مقطورة نصف منخفضة

MÜLLER-MITTELTAL 3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.

* TS 3 Profile 30.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes

----Axles:

* 3 x 11 t BPW Eco Plus axles
* Last axle is self-steering with electro-pneumatic steering lock

----Suspension:

* Air suspension with lifting and lowering system as well as RtR (Raise-the-Roof) valve

----Electrics / Lighting:

* TPMS (Tire Pressure Monitoring System)
* Smartboard control box mounted on the trailer as an info tool, with pressure sensors for total axle load display
* 15-pin power plug
* LED lighting system 12 / 24V
* Removable LED beacon at the rear left

----General Fittings:

* Side underrun protection
* Support winches at the front and mechanical swing-down supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder under the chassis on the right side

----Lowbed Area:

* Saddle platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid
* 400 mm aluminium drop sides (RAL 9010 pure white) on the sides of the saddle platform, foldable and removable
* Rear wall inserted, 150 mm high
* Rear incline on the saddle platform to the lowbed, approx. 700 mm long
* Saddle platform with 50 mm timber planks and lowbed platform with 60 mm timber planks
* Tread plate above the axles

----Extensions:

* 8 x mechanical fold-out extensions up to a total width of 3 m, not on the rear incline (extension planks available and stored on the saddle platform)
* Mechanically adjustable warning sign packages front and rear

----Load Securing (Lashing Package):

* On the saddle platform: 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing rods on each side of the external frame
* On the lowbed platform: 2 x 13.4 t lashing rings on each side, as well as 4 x 10 t lashing rings, swingable and lowerable, embedded in the external frame
* On each side: 2 x 6.4 t lashing eyes, and 1 lashing ring at the excavator stick recess at the rear
* 2 x container locks directly after the step in the lowbed platform

----Excavator Stick Recess:

* Excavator stick recess from the end of the last fixed axle, over the steering axle, up to the rear cross member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm

----Access Ramps:

* Mechanical one-piece, hot-dip galvanized hydraulic access ramps approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way control block for future customer installation of hydraulic ramp shifting
* The outer board of the ramp consists of 50 mm hardwood
* Climbing strips on the outer frame of the ramp and on the approach incline

----Hydraulics:

* Hydraulic flow divider in the trailer (for truck hydraulic pump capacity from over 40 l/min up to 120 l/min)

Hfsdpfjl Tnvgjx Abbod
----Load Dimensions:

* Loading surface of the saddle platform: approx. 3,935 x 2,480 mm
* Lowbed loading area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm approach incline)

----Fifth Wheel Height:

* approx. 1,220 mm (suitable for 2- and 3-axle tractors)

----Paintwork:

* Chassis, ramps, rear folding supports, widening adapters hot-dip galvanized
* Axles, support winches, air tanks painted black
* Vehicle is hot-dip galvanized

----Information:

* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images may show equipment not included in the offered vehicle

----Delivery Time:

* Available from week

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.