عربة مسطحة منخفضة نصف مقطورة

Faymonville 3-Achs-Semi-hydr.Ladeboden-Rampen-Gitter

Gooseneck:
-Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 6°
-Technical fifth wheel load: 18,000 kg
-For tractor units: 4 x 2 and 6 x 2

Loading area:
-Loading area, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°
-Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg
-Grating and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area

Ramps:
-A pair of two-part AXS steel ramps with a length of approx. 4,675 mm and a width of approx. 900 mm
-Grating floor
-Hydraulically hinged ramp tips
-Ramps can be moved hydraulically by approx. 235 mm outwards and approx. 365 mm inwards
-Painted sand coating on the outer frame of the ramp and on the ramp tip
-Flashlights on the outside of the ramp tips with switch next to the ramp controls
-Ramp secured in driving position using a quick release

Axles, suspension and tires:
-BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle with self-steering
-1st Axle with traction aid

-Operation via the brake pedal in the tractor unit
-Technical axle load: 12,000 kg
-Air suspension with lifting and lowering valve
-235/75 R 17.5
-TPMS tire pressure monitoring system in accordance with ECE R 141
-TPMS tire pressure monitoring sensors mounted in all wheels including spare wheels

Braking system:
-WABCO EBS-E brand braking system in accordance with EU regulations

Paintwork:
-Semi-trailer MB 7350 Nova gray

Accessories included:
-Bulkhead made of steel, plug-in, approx. 400 mm high
-3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches
-Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide
-JOST module B - static test load = 50,000 kg
-Continuous grating with 5 mm sheet metal underlay as additional reinforcement
Kfsdpfx Absuadk Nenoa
-Painted sand coating
-Cutouts in the outer frame of the loading area and the lifting bed for hanging control valves for the hydraulic ramps on the right of the vehicle
-2" kingpin
-Central lubrication system with 1 pump, brand BEKAMAX
-On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized
-Electric cable winch, approx. 5,400 kg pulling force, with radio remote control
-Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller
-WABCO Smart Board System
-4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.