مقطورة نصف قلابة

Fliegl DHKS 390 -25 m³

Customized transport solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Further information:
Chassis, semi-trailer tipper
Fine-grained steel welded construction, in basic lightweight design, trailer plate with 2 interchangeable kingpins
Curved front end, patented
Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backwards.
Wedge blocks with holder
Rear underrun protection, foldable
Half-shell fenders
Integrated fender holder, surface repels stones
Tarpaulin rod with holder
Towing hook at the rear
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
Axle/chassis laser-aligned, reduces tire wear and fuel consumption
Axles in off-road design
Air suspension
1st axle: automatic lift axle, including forced lowering and starting assistance
Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through
Braking system
2-line compressed air braking system, color-coded lines for easy servicing
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, without connecting line
EBS, electronic braking system with EBS socket at the front, without connecting cable
Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS!
with lifting and lowering valve
Vehicle - driving stability system
Wheels and tires
385/65 R22.5
Steel rims, factory silver
"TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck). Only on standard tires.
Electrical system
24 Volt, multi-chamber lights, yellow LED lighting on the sides
Yellow LED lighting on the sides linked to the turn signal ("flashing side lights")
2 x 7-pole non-interchangeable sockets at the front, without connecting cable
Hydraulics
Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection)
Operation hydraulically via truck auxiliary drive
Body
Gjdpfx Anji Ri Dpj Ijbu
Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders with access ladder on the front wall.
Greenline - conical and aerodynamic body shape
Shovel and broom holder on the outside of the front wall.
Membrane - rear wall
Rear wall as a hinged flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with lever locks on the lower side.
Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design
Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operation.
Roller cover on one side for placement on the right side, with central locking on the left side
Country of registration / signs
Germany
Type approval according to EC 2007/46
Superstructure strength according to EN 12642
24/7 service hotline
prepared for single-row license plate holder
Warning sign according to ECE - 70
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Paint finish
Frame DB 7350 Novagrau
"10-year warranty against rust-through"
Support legs galvanized
Body RAL desired color, solid color
Roller cover RAL 7035 light gray

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.