مقطورة نصف منخفضة

EBERT TLS 55 ATV / Tele / 39,5to Nutzlast

Technical data for EBERT TLS 43 ATV special low loader:
* Permissible fifth wheel load: 19,000 kg
* Permissible axle load: 36,000 kg
* Permissible total weight: 55,000 kg
* Empty weight according to DIN approx.: 15,500 kg
* Low bed length i.L.: approx. 6,650 mm + 4,000 mm
* Axle table length: 3,550 mm
* External width: 2,550 mm
* Loading edge/low bed: approx. 200 mm - 350 mm
* Sliding table length: 500 mm
* Widening/low bed to: 3050 mm
* Low bed/telescopic by: 4,000 mm
* B-dimension: 13,300 mm
* Entire vehicle flame-spray galvanized, with epoxy resin primer and 2K paint
* Extra-wide signage at the front and rear with red/white signs
Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F 
Steering: TRIDEC DLS with Tritronic 
Axles: 12,000 kg ? DLS independent wheel suspension, hydraulically steered and hydraulically sprung    

Front loft bed: * Side walls 600 mm high
* Corners on the loft bed angled at the front
* Doors in the left and right corners accessible from the outside
* Lockable storage box with lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm
* Spare wheel on the loft bed, behind the partition on the right
* Stairs on the right-hand side to get from the low bed to the front loft bed
* Hydraulic coupling for uncoupling on the left-hand side 6-way Multi-Faster coupling
* 6 lashing positions 3,000 kg version outside on the loft bed (drop lashing eyes)
* 2 lashing positions 5,000 kg version at the top of the longitudinal strands (to the rear)
 Low bed: * Climbing aids on the boom ? Extension
* Outer frame t=8 mm
* Low bed can be telescoped by 4,000 mm and locked every 500 mm
* With sliding table, lockable every 250 mm
* 28 lashing positions 10,000 kg, outside version in the outer frame
* 24 plug-in tubes 90 x 90, evenly distributed to widen the low bed to 3,050 mm
* 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang
 High bed at the rear: * High bed slanted towards the front and perforated, for retrofitting ramp support profiles, using adapters, galvanized version
* Ramp support profiles at the rear (Altec) ? C - rails
* 8 lashing positions 10,000 kg version on the outside of the raised bed
* 6 lashing positions 5,000 kg version in the excavator trough
* 10 lashing positions 5,000 kg version for extra width in the outer frame
* Excavator trough closure at the front and rear with a wooden base plate (plug-in)
 Electrics: * Use NATO coil, power comes from the towing vehicle
* Rotating beacon in the middle of the rear
* Side lights in LED version
* Standard rear light for vertical mounting (LC5)
Todpeh Tvm Iofx Adqsf
* Work lights on the raised bed, to illuminate the low bed
* Extra width signs at the front and rear for controlling uncoupling, sensor for safety and pressure switch for the suspension
Air:
* Aluminum air tank 80 l
* TEBS modulator
* Locking pull-out left and right (valve on the side in the raised bed at the back)
* Double release valve
 Hydraulics: Hydraulic system on the High bed for steering, suspension and detachable gooseneck  
Accessories: * 2x 4 wooden planks as support for widening the low bed and intermediate table
* 2 safety wedges for uncoupling
* 4 wheel chocks

We can make you a leasing or financing offer on request., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Subject to errors and prior sale!

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.