آلة القش / تيدر القش / جهاز المرج
Metal-Fach Ballenwickler Z 529 selbstladend hydr
آلة القش / تيدر القش / جهاز المرج
Metal-Fach Ballenwickler Z 529 selbstladend hydr
سنة الصنع
2024
الحالة
جديد
موقع
Gevelsberg
عرض الصور
عرض الخريطة
البيانات الأساسية
- تعيين:
- آلة القش / تيدر القش / جهاز المرج
- الموديل:
- Metal-Fach Ballenwickler Z 529 selbstladend hydr
- سنة الصنع:
- 2024
- الحالة:
- جديد
السعر والموقع
- موقع القائمة:
- Am Sinnerhoop 17, 58285 Gevelsberg, DE
اتصل
تفاصيل العرض
- معرّف القائمة:
- A660-16-51
- التحديث الأخير:
- في ١٧.٠٧.٢٠٢٤
الوصف
Metal tray
Bale wrapper
Z529
self-loading
Length: 2220mm
P0Urt
width: 1420mm
height: 2650mm
Own weight: 780kg
Tractor hitch: three-point hitch
Machine drive: hydraulic
Tractor power: 60KW
Empfolene delivery capacity of the tractor pump: 26l/min
Empfolener hydraulic pressure: 14 MPa
Bale size 1200mm - 1500mm
Film width: 750mm
Standard equipment:
3-point hitch
Film cutter
Film pre-stretcher 750mm
Manual control panel
Semi-automatic or fully automatic wrapping process
The Z529 bale wrapper is a machine that is suspended from the front or rear three-point linkage of the tractor. It is loaded from below by means of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm rotating around the bale with an attached film feeder, which coats the bale rotating on the rollers with film. Once the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a push button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. It takes about two minutes to wrap a bale with a diameter of 1200 mm. The compact dimensions of the machines allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feeder, a hydraulically driven film cutter and the control panel. As an option, the machine can be equipped with a hydraulic bale placer, which enables the wrapped bale to be placed on its base.
ATTENTION !!!!! MUST READ !!!!!
We expressly reserve the right to prior sale, as we also offer this item on other portals.
We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!!
Illustrations similar, may contain accessories subject to a surcharge.
The interior dimensions given are approximate.
TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!!
TRADE-INS AND TRADE-INS POSSIBLE !!!
Showroom: 58285 Gevelsberg , Am Sinnerhoop 17
Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00
always over 500 new and used trailers in stock !!!
Imprint:
Pegasus Trailers
Am Sinnerhoop 17
58285 Gevelsberg
Phone: Fax:
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Bale wrapper
Z529
self-loading
Length: 2220mm
P0Urt
width: 1420mm
height: 2650mm
Own weight: 780kg
Tractor hitch: three-point hitch
Machine drive: hydraulic
Tractor power: 60KW
Empfolene delivery capacity of the tractor pump: 26l/min
Empfolener hydraulic pressure: 14 MPa
Bale size 1200mm - 1500mm
Film width: 750mm
Standard equipment:
3-point hitch
Film cutter
Film pre-stretcher 750mm
Manual control panel
Semi-automatic or fully automatic wrapping process
The Z529 bale wrapper is a machine that is suspended from the front or rear three-point linkage of the tractor. It is loaded from below by means of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm rotating around the bale with an attached film feeder, which coats the bale rotating on the rollers with film. Once the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a push button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. It takes about two minutes to wrap a bale with a diameter of 1200 mm. The compact dimensions of the machines allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feeder, a hydraulically driven film cutter and the control panel. As an option, the machine can be equipped with a hydraulic bale placer, which enables the wrapped bale to be placed on its base.
ATTENTION !!!!! MUST READ !!!!!
We expressly reserve the right to prior sale, as we also offer this item on other portals.
We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!!
Illustrations similar, may contain accessories subject to a surcharge.
The interior dimensions given are approximate.
TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!!
TRADE-INS AND TRADE-INS POSSIBLE !!!
Showroom: 58285 Gevelsberg , Am Sinnerhoop 17
Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00
always over 500 new and used trailers in stock !!!
Imprint:
Pegasus Trailers
Am Sinnerhoop 17
58285 Gevelsberg
Phone: Fax:
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مزود
جهة الاتصال: السيد Max Schnee
Am Sinnerhoop 17
58285 Gevelsberg, ألمانيا
+49 2332 ... تبين
تقديم الطلب
الهاتف & فاكس
+49 2332 ... تبين
قد تكون مهتمًا أيضًا بهذه الإعلانات.
اعلان مصنف
Gevelsberg
2.477 km
آلة القش / تيدر القش / جهاز المرج
Metal-Fach Z577 Ballenwickler Auto Beladung
Metal-Fach Z577 Ballenwickler Auto Beladung
اعلان مصنف
Gevelsberg
2.477 km
آلة القش / تيدر القش / جهاز المرج
Metal-Fach Z593 Ballenwickler NEU Baujahr 2024
Metal-Fach Z593 Ballenwickler NEU Baujahr 2024
اعلان مصنف
Gevelsberg
2.477 km
أجهزة أخرى
Metal-Fach Böschungsmulcher Z022/3
Metal-Fach Böschungsmulcher Z022/3
اعلان مصنف
Gevelsberg
2.477 km
آحرون
Metal-Fach T019/2 Ballenwagen 20t. Neufahrzeug
Metal-Fach T019/2 Ballenwagen 20t. Neufahrzeug
اعلان مصنف
Gevelsberg
2.477 km
قلابة 3 اتجاهات
Metal-Fach T730/3 Dreiseitenkipper 16To 40km/h
Metal-Fach T730/3 Dreiseitenkipper 16To 40km/h
اعلان مصنف
Gevelsberg
2.477 km
آلة القش / تيدر القش / جهاز المرج
Metal-Fach Z562 RN Rundballenpresse NEU
Metal-Fach Z562 RN Rundballenpresse NEU
اعلان مصنف
Gevelsberg
2.477 km
آلة القش / تيدر القش / جهاز المرج
Metal-Fach Rundballenpresse Z562 RN feste Kammer
Metal-Fach Rundballenpresse Z562 RN feste Kammer
اعلان مصنف
Gevelsberg
2.477 km
أجهزة أخرى
Metal-Fach Ballenzange 600kg
Metal-Fach Ballenzange 600kg
اعلان مصنف
Gevelsberg
2.477 km
آلة نثر الأسمدة
Metal-Fach N267 Miststreuer Dungstreuer Neu
Metal-Fach N267 Miststreuer Dungstreuer Neu
اعلان مصنف
Gevelsberg
2.477 km
آلة القش / تيدر القش / جهاز المرج
Metal-Fach Rundballenpresse Z562 RN
Metal-Fach Rundballenpresse Z562 RN
اعلان مصنف
Gevelsberg
2.477 km
آلة نثر الأسمدة
Metal-Fach N280/2 Miststreuer Dungstreuer
Metal-Fach N280/2 Miststreuer Dungstreuer
اعلان مصنف
Gevelsberg
2.477 km
آلة الحراثة
Metal-Technik Wiesenwalze hydr Fahrwerk 3m
Metal-Technik Wiesenwalze hydr Fahrwerk 3m
اعلان مصنف
Gevelsberg
2.477 km
منصة العمل
Metal-Fach Ballenwagen T014/2 2-Achser
Metal-Fach Ballenwagen T014/2 2-Achser
اعلان مصنف
Gevelsberg
2.477 km
قلابة 3 اتجاهات
Metal-Fach T711/3 2-Achs 3-Seitenkipper 16to
Metal-Fach T711/3 2-Achs 3-Seitenkipper 16to
اعلان مصنف
Gevelsberg
2.477 km
أجهزة أخرى
Metal-Fach T814/1 Kehrmaschine SONDERPREIS 1,8m
Metal-Fach T814/1 Kehrmaschine SONDERPREIS 1,8m
اعلان مصنف
Gevelsberg
2.477 km
قلابة 3 اتجاهات
Metal-Fach T730/3 und T711/3 Dreiseitenkipper
Metal-Fach T730/3 und T711/3 Dreiseitenkipper
اعلان مصنف
Gevelsberg
2.477 km
أجهزة أخرى
Metal Fach Kehrmaschine T814/1, 1,80m
Metal Fach Kehrmaschine T814/1, 1,80m
اعلان مصنف
Gevelsberg
2.477 km
قلابة 3 اتجاهات
Metal-Fach Typ T739 Zweiachsanhänger 18to
Metal-Fach Typ T739 Zweiachsanhänger 18to
اعلان مصنف
Gevelsberg
2.477 km
آحرون
Metal-Fach 2-Achsanhänger T739 18to
Metal-Fach 2-Achsanhänger T739 18to
اعلان مصنف
Gevelsberg
2.477 km
منصة العمل
Metal-Fach Ballenwagen T009 3-Achser
Metal-Fach Ballenwagen T009 3-Achser
اعلان مصنف
Gevelsberg
2.477 km
أجهزة أخرى
Metal-Fach Kehrmaschine T814/3 NEU Frontlader
Metal-Fach Kehrmaschine T814/3 NEU Frontlader
اعلان مصنف
Gevelsberg
2.477 km
جزازة
Metal-Fach Z011/3 Scheibenmähwerk 3,3m
Metal-Fach Z011/3 Scheibenmähwerk 3,3m
اعلان مصنف
Gevelsberg
2.477 km
آلة القش / تيدر القش / جهاز المرج
Metal-Fach Z093 Front-Mähwerk 3m NEU
Metal-Fach Z093 Front-Mähwerk 3m NEU
اعلان مصنف
Gevelsberg
2.477 km
آلة نثر الأسمدة
Metal-Fach N280/2 Miststreuer Dungstreuer
Metal-Fach N280/2 Miststreuer Dungstreuer
اعلان مصنف
Gevelsberg
2.477 km
آلة نثر الأسمدة
Metal-Fach N275 Miststreuer Dungstreuer Neu
Metal-Fach N275 Miststreuer Dungstreuer Neu
تم حذف إعلانك بنجاح
حدث خطأ