هيكل قابل للتبديل مع بناء صندوقي
Kerex Fifty Box

في بي بالإضافة إلى ضريبة القيمة المضافة
‏4.443 €
(‏5.376 € إجمالي)
الحالة
مستعمل (يعمل بكامل كفاءته)
الموقع
Praha جمهورية التشيك
هيكل قابل للتبديل مع بناء صندوقي Kerex Fifty Box
هيكل قابل للتبديل مع بناء صندوقي Kerex Fifty Box
هيكل قابل للتبديل مع بناء صندوقي Kerex Fifty Box
هيكل قابل للتبديل مع بناء صندوقي Kerex Fifty Box
more Images
Kerex Fifty Box
Kerex Fifty Box
Kerex Fifty Box
Kerex Fifty Box

البيانات الأساسية

تسمية:
هيكل قابل للتبديل مع بناء صندوقي
الشركة المصنعة:
Kerex
طراز:
Fifty Box
الحالة:
مستعمل
الوظائف:
يعمل بكامل كفاءته

السعر والموقع

في بي بالإضافة إلى ضريبة القيمة المضافة
‏4.443 €
(‏5.376 € إجمالي)
الموقع:
Praha, جمهورية التشيك جمهورية التشيك

تفاصيل فنية

الأبعاد والوزن

الوزن الإجمالي:
2.700 كجم
وزن فارغ:
1.500 كجم
الوزن الأقصى للحمولة:
1.200 كجم
حجم مساحة التحميل:
22 م³
طول مساحة التحميل:
3.750 مم
عرض مساحة التحميل:
2.550 مم
ارتفاع مساحة التحميل:
2.750 مم

مزيد من التفاصيل

لون:
أبيض

تفاصيل العرض

معرّف الإعلان:
A233-13-801
تحديث:
آخر مرة في 10.11.2026

وصف

Floor unit
Made of bent profiles with a thickness of 4 mm, steel grade 52.2, floor structure with a height of 203 or 180 mm, floor plate made of non-slip, waterproof plywood with a thickness of 27 mm (24 mm). Fastening elements with a special design, four rigid or telescopic supports, extendable door ladder. The guide tunnel with a width of 600 mm is made of two closed profiles. A protective profile to prevent damage during transport is located at the front.

Housing – trapezoidal
Side, front, and roof panels are made of galvanized perforated sheet metal, grade St. 37.2. The rear portal consists of double-leaf doors made of galvanized sheet metal or roll-up gates. A protective profile with a height of approximately 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2. Four ventilation openings in the side walls. Steel bumpers are located in the lower part of the rear portal to protect the body from damage.

Housing – smooth
Side and front panels are made of smooth cassettes made of galvanized sheet metal, grade St. 37.2, roof panels are made of galvanized perforated sheet metal, the rear portal consists of double-leaf smooth doors made of galvanized sheet metal or roll-up gates, a protective profile with a height of 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2, four ventilation openings in the side walls. Steel bumpers protecting the body from damage are located in the lower part of the rear portal.

Surface treatment and marketing description
Sandblasting to SA 2.5
Chemical degreasing and preliminary chemical treatment for corrosion protection in the immersion tube
Cathodic immersion coating in a light shade on the outside and inside
Powder coating in RAL color on the outside and inside upon customer request
Marking and warning labels according to DIN 284, DIN 283 standards
Fgedpfo Aitplsx Akbji
Marketing description according to the proposal

Contact: Mon-Fri from 8 am to 4 pm, I respond to SMS messages

The container is currently in the Czech Republic (Prague).

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.

مورد

المورّد يخضع حاليًا للمراجعة. سيتم إرسال طلبك ويمكن للمورّد الرد عليه بمجرد اكتمال المراجعة بنجاح.

إرسال طلب

أرضus 
ألمانيا
النمسا
سويسرا
الولايات المتحدة الأمريكية
المملكة المتحدة
فرنسا
بلجيكا
إسبانيا
المكسيك
إيطاليا
هولندا
بولندا
الاتحاد الروسي
بيلاروس (جمهورية بيلاروس)
أوكرانيا
إستونيا
تركيا
نيوزيلندا
أيرلندا
جمهورية التشيك
الدانمارك
فنلندا
السويد
النرويج
لوكسمبورغ
اليونان
ليتوانيا
لاتفيا
آيسلندا
البرتغال
البرازيل
فنزويلا
الأرجنتين
المجر
سلوفاكيا
رومانيا
مولدوفا
سلوفينيا
صربيا
الجبل الأسود
ألبانيا
كرواتيا
بلغاريا
مقدونيا الشمالية
البوسنة والهرسك
إسرائيل
مصر
المغرب
الهند
إندونيسيا
كوريا الجنوبية
اليابان
تايلاند
ماليزيا
فيتنام
الصين، جمهورية الصين الشعبية
تايوان
إيران
بنغلاديش
تعذر إرسال الطلب. يرجى المحاولة مرة أخرى لاحقًا.