مقطورة نصف قلابةKEMPF
SKM 35/3SK*84m³*HARDOX*Liftachse*BPW*
مقطورة نصف قلابة
KEMPF
SKM 35/3SK*84m³*HARDOX*Liftachse*BPW*
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
39.800 €
(47.362 € إجمالي)
سنة الصنع
2021
الحالة
مستعمل
الموقع
Kehl 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
39.800 €
(47.362 € إجمالي)
- موقع البائع:
- Elsässer Str. 61, 77694 Kehl, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
35.000 كجم
الوزن الأقصى للحمولة:
22.120 كجم
العرض الكلي:
2.550 مم
الارتفاع الكلي:
3.960 مم
حجم مساحة التحميل:
84 م³
طول مساحة التحميل:
13.300 مم
عرض مساحة التحميل:
2.400 مم
ارتفاع مساحة التحميل:
2.500 مم
محاور وعجلات
تكوين المحور:
3 محاور
ميزات الأمان
نظام الفرامل المانعة للانغلاق (ABS)
مزيد من التفاصيل
التسجيل الأول:
07/2021
تفاصيل العرض
- معرّف الإعلان:
- A227-51-147
- رقم المرجع:
- 0944026
- تحديث:
- آخر مرة في 17.10.2026
وصف
3-axle Kempf SKM 35/3 SK steel tipper body HARDOX
VIN: M039731
Chassis / Components:
* Air suspension / Raise and lower function
* Lift axle
* 3 x BPW Eco axles with drum brakes
* Axle load indicator via EBS
* Tires: 385/65 R.22.5
* Tire tread depth: Front ~60/70%, Middle ~80/90%, Rear ~60/40%
* Retractable underrun protection (manual)
* Steel chassis, fine-grained steel
* Chassis in a box-shaped, reinforced design
* All components in hot-dip galvanized finish
Body:
* Steel chassis, fine-grained steel
* Steel tipper body made of HARDOX steel (HB-450), reinforced design
* Front cylinder Hyva, max. 150 bar, single-circuit hydraulic system
* Working volume of the tipping cylinder approx. 190 liters
* Volume: approx. 84 m³
* Loading area: 13,300 mm x 2,400 mm x 2,500 mm (front) / 2,700 mm (rear)
* Floor: continuous 6 mm HARDOX steel
* Front and side walls: made of 4 mm HARDOX steel
* No standing platform / however, a small walkway on the left and right next to the tipping cylinder
* Rear wall as a 2-wing door (1/2 left - 1/2 right split)
* No swing door / no sliding gate
* No rubber seal
* Twist lock as a container locking mechanism
* 2 hook locks, manual
Weights:
* Gross vehicle weight 35,000 kg
* Payload 22,120 kg
* Tare weight 12,880 kg
Other:
* German registration
* New main inspection possible -- valid until 02/2027
New main inspections / safety checks or weight reductions / increases are possible upon request. We will be happy to assist you in obtaining export / transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!----
We speak the following languages: German, English and Russian!----
No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we?
Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and distribution of commercial vehicles, we are a reliable partner for customers worldwide.
The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles.
Convince yourself!
Our service for you:
Rodez Al Snspfx Acpech
Loading vehicles
We will be happy to help you load your purchased vehicles.
Organizing special transports
We will be happy to help you organize special transports.
Daily license plates / export license plates
We will be happy to help you obtain export license plates / short-term license plates.
Handling customs formalities
We will be happy to help you with customs matters.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
VIN: M039731
Chassis / Components:
* Air suspension / Raise and lower function
* Lift axle
* 3 x BPW Eco axles with drum brakes
* Axle load indicator via EBS
* Tires: 385/65 R.22.5
* Tire tread depth: Front ~60/70%, Middle ~80/90%, Rear ~60/40%
* Retractable underrun protection (manual)
* Steel chassis, fine-grained steel
* Chassis in a box-shaped, reinforced design
* All components in hot-dip galvanized finish
Body:
* Steel chassis, fine-grained steel
* Steel tipper body made of HARDOX steel (HB-450), reinforced design
* Front cylinder Hyva, max. 150 bar, single-circuit hydraulic system
* Working volume of the tipping cylinder approx. 190 liters
* Volume: approx. 84 m³
* Loading area: 13,300 mm x 2,400 mm x 2,500 mm (front) / 2,700 mm (rear)
* Floor: continuous 6 mm HARDOX steel
* Front and side walls: made of 4 mm HARDOX steel
* No standing platform / however, a small walkway on the left and right next to the tipping cylinder
* Rear wall as a 2-wing door (1/2 left - 1/2 right split)
* No swing door / no sliding gate
* No rubber seal
* Twist lock as a container locking mechanism
* 2 hook locks, manual
Weights:
* Gross vehicle weight 35,000 kg
* Payload 22,120 kg
* Tare weight 12,880 kg
Other:
* German registration
* New main inspection possible -- valid until 02/2027
New main inspections / safety checks or weight reductions / increases are possible upon request. We will be happy to assist you in obtaining export / transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!----
We speak the following languages: German, English and Russian!----
No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we?
Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and distribution of commercial vehicles, we are a reliable partner for customers worldwide.
The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles.
Convince yourself!
Our service for you:
Rodez Al Snspfx Acpech
Loading vehicles
We will be happy to help you load your purchased vehicles.
Organizing special transports
We will be happy to help you organize special transports.
Daily license plates / export license plates
We will be happy to help you obtain export license plates / short-term license plates.
Handling customs formalities
We will be happy to help you with customs matters.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2002
244 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 7851 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ




































