حاوية متدحرجة
Wassertank-Abrollbehälter ca. 12.000L
حاوية متدحرجة
Wassertank-Abrollbehälter ca. 12.000L
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
15.900 €
(18.921 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Bovenden 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
15.900 €
(18.921 € إجمالي)
- موقع البائع:
- Alte Bundesstraße 48, 37120 Bovenden, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
14.745 كجم
وزن فارغ:
2.245 كجم
الوزن الأقصى للحمولة:
12.500 كجم
المحرك وعلبة التروس
نوع التروس:
آخر
مزيد من التفاصيل
لون:
أحمر
كابينة السائق:
آخر
تفاصيل العرض
- معرّف الإعلان:
- A225-07-842
- رقم المرجع:
- 89942
- تحديث:
- آخر مرة في 07.10.2026
وصف
Vehicle location: Bovenden, steel superstructure, rear outlet.
Superstructure: Water tank roll-off container, approx. 12,000 liters. ARCHIVE IMAGES: Water tank without platform, approx. 12,000 liters – according to DIN 30722-1.
- Internal dimensions (length x width x height): 5500x2394x1003 mm
- Overall dimensions (length x width x height): 6,081mm x 2,394mm x 1,743mm
Hnsdpfx Aszr Rmcjbiow
- Material quality: S235 (St-37)
- Bottom plate / wall plates: Smooth bottom plate, 5mm thick, sides 3mm, roof and rear wall 4mm
- At the rear, bottom: 2x Storz A couplings with ball valve (4 inches)
- At the rear, top: one Storz B coupling with elbow and cover (2 inches)
- At the front, top on the hook: one Storz B coupling with elbow, coupling, and cover (2 inches)
- Galvanized and screwed-in ladder on the front wall, pipe for venting (with ball valve for closing)
- Frame made of INP180
- On the roof: manhole, diameter 600 mm
- Inside: 3 baffle plates, diameter 600 mm (large cavities)
- Waterproof (tested for watertightness)
- Greasable steel rollers
Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm thick, externally primed with epoxy resin lacquer, 60 µm thick, and painted with 2K lacquer (polyurethane lacquer B7), 40 µm thick, in RAL color 3000 (red).
With UVV sticker (DGUV), checklist (safety instructions), and warning marking – waterproof (tested for watertightness). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Superstructure: Water tank roll-off container, approx. 12,000 liters. ARCHIVE IMAGES: Water tank without platform, approx. 12,000 liters – according to DIN 30722-1.
- Internal dimensions (length x width x height): 5500x2394x1003 mm
- Overall dimensions (length x width x height): 6,081mm x 2,394mm x 1,743mm
Hnsdpfx Aszr Rmcjbiow
- Material quality: S235 (St-37)
- Bottom plate / wall plates: Smooth bottom plate, 5mm thick, sides 3mm, roof and rear wall 4mm
- At the rear, bottom: 2x Storz A couplings with ball valve (4 inches)
- At the rear, top: one Storz B coupling with elbow and cover (2 inches)
- At the front, top on the hook: one Storz B coupling with elbow, coupling, and cover (2 inches)
- Galvanized and screwed-in ladder on the front wall, pipe for venting (with ball valve for closing)
- Frame made of INP180
- On the roof: manhole, diameter 600 mm
- Inside: 3 baffle plates, diameter 600 mm (large cavities)
- Waterproof (tested for watertightness)
- Greasable steel rollers
Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm thick, externally primed with epoxy resin lacquer, 60 µm thick, and painted with 2K lacquer (polyurethane lacquer B7), 40 µm thick, in RAL color 3000 (red).
With UVV sticker (DGUV), checklist (safety instructions), and warning marking – waterproof (tested for watertightness). ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2002
2.507 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 551 8... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ






















