مقطورة نقل الأخشاب

DOLL Kurzholzanhänger A2G-10 Spezialanhänger

DOLL - 2-Axle Short Timber Trailer in "Bogie" Design, Type A2G-10L500 (A131)

Technical Data:
Dimensions:
Trailer overall length: 8,511 mm (with drawbar length 1,900 mm)
Loading length: 6,611 mm
Front overhang: 760 mm
Tjdpfxozq Hbgs Afuea
Rear overhang: 856 mm
Vehicle width: 2,550 mm
Wheelbase: 4,995 mm
Loading height, top edge of frame, loaded: 1,187 mm (with tire size 275/70 R 22.5)
Overall height: max. 4,000 mm
Weights:
Permissible total weight: 18,000 kg
Axle load (2 x 9t): 18,000 kg (technical 24,000 kg)
Unladen weight approx.: 3,350 kg (without bogie and stakes)
Payload approx.: 14,650 kg

Standard equipment: A2G DOLL - 2-axle short timber trailer in "bogie" design - straight top chord
Stable welded construction with 2 longitudinal beams and a straight top chord.
- Bogie with ball bearing swivel
- 1 piece chock with bracket
- Lateral impact protection according to ECE?R 73
Rear underrun protection:
Aluminum underrun protection, according to ECE?R 58
All lighting and license plate holder protected and integrated, according to ECE?R 48
Wheel covers: Full plastic fenders above the wheels,
mounted at the front on the bogie and at the rear on the main frame,
with DOLL splash guards behind the axles.

Frame cover:
Continuous aluminum duet sheet cover (3/5 mm) screwed between the top chords.
Drawbar GZY27:
Drawbar with silent block bearings and drawbar support, type GZY 27
Drawbar eye:
Length:
D-value:
Maximum front axle load:
Maximum total weight: Ø 50 mm (heavy-duty ECE)
1,900 mm
125 kN
10 t
27 t

Connection cable to the truck: Laid along the drawbar (air, light, ABS).
Cable routing: Protected routing of brake and electrical cables on the main frame.
Clamp bracket: Inclined clamp bracket at the front, reinforced.
Splash guard: Continuous splash guard at the end of the vehicle, pivoting, with ?DOLL? logo.

Chassis / Frame: 12 t
Axle: 2 single axles, manufacturer BPW, 12 t with drum brakes, both axles with ABS and automatic slack adjusters, including safety cables. Suspension type SL, with 2 x 43mm trailing arm spring.
Air suspension: Air suspension without lifting and lowering.
Weight indicator without Smartboard: EBS-E weight indicator for trailers with air suspension, consisting of 2 pressure sensors for determining the axle loads. The axle loads are transmitted to the truck via CAN-BUS, for
weight display on the truck display. (Truck equipment not included in the scope of delivery!)
Braking system: Electronically controlled 2-line pneumatic braking system (EBS-E).
Brand-name manufacturer, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, operable by means of a parking release safety valve, and from the driver's cab (truck-side installation not included in the scope of delivery!)
Air tank made of aluminum.

Brake connection: 1 piece Duomatic coupling head.

Tires: Tires (85.50 kg / piece): 8 tires 275/70 R 22.5, manufacturer Continental Hybrid HS3 on steel rim 8.25 x 22.5.

Bogie / Stakes:
Bogie: 6 pieces ECCO steel bogie body with 2° stake inclination type Kombi 7 (80.0 kg),
with bracket - clamp attachment mounted on the main frame. Including 1 pair of hooks for load securing.
Stakes: ECCO aluminum stakes type ALU 7, screwable, fixed-length stake.
Basic height 2,550 mm (21.0 kg).
Maximum loading capacity per stake pair 7t.

Electrical equipment / Lighting:
Lighting system: Conventional wiring of the trailer to increase the quality standard.
- Long service life
- Insensitive to moisture and dirt
- Minimal mainten

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.