مقطورة نصف منخفضة

FAYMONVILLE MAX Trailer MAX110 Semi-Tieflader

Excerpt from Equipment List:

Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick.

Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles.
Gksdpfx Anozqiiaevob

Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool.

Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice.

Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load).

Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit.

Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible.

Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa)

Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098

Includes the following additional equipment:
- 2-inch kingpin
- One galvanized steel front wall, approximately 400 mm high.
- Yellow-red air couplings on the galvanized connection bar at the front.
- 4 wheel chocks with holder on the front wall (± 5kg)
- One spare wheel holder in front of the front wall.
- Electro-hydraulic unit (± 45kg)
- Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit)
- Mounting in the rear area of the gooseneck for aluminum loading ramps.
- European reflector signs (red-yellow) on the rear of the trailer.
- Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer.
- On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket.
- One holder for a rotating beacon on the rear of the trailer.
- Galvanized folding supports under the taper of the loading platform.
- One mud flap on the rear of the trailer.
- Manual and description on a USB stick.
- Speed stickers 80 km/h on the rear and on both sides.
- Load measuring device for determining the axle loads including load chart.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.