مقطورة نصفية مفتوحة مع قماش مشمع

WIELTON Curtain Master MEGA

Curtain Master MEGA
White aluminum
Overall length 13,830 mm
Internal length 13,620 mm
Overall width 2,550 mm
Internal width 2,480 mm
Internal width between the stringers 2,480 mm
Axle spacing (1st to 2nd and 2nd to 3rd) 1,310 mm
Saddle coupling height unladen 950 mm
Frame neck height 80 mm
Platform height/loading height unladen 1,000 mm
Platform height/loading height laden 970 mm
Kingpin to first axle distance 6,390 mm
Technical total weight 42,000 kg
Tare weight Approx. 6,500 kg
Axle load 3 x 9,000 kg
Saddle load 15,000 kg

Chassis / Frame
- Frame as a double longitudinal beam with cross members + welded outer frame
- Welded construction made of high-quality S700 steel in weight-optimized design
- Perforated outer frame with continuous lashing points for securing the load
- SAFETY LOCK system, 60 holes per side for load securing
- Holes and edges additionally protected with rubber pads
- Working area according to ISO1726:2003

Axles and Suspension
- 3 axles with a load-carrying capacity of 9,000 kg each
- Axle manufacturer SAF with air suspension and disc brakes
- First axle as a lift axle
- Brake discs with a diameter of 370 mm
- Kingpin: 2nd SAE standard, interchangeable
- 2 mechanical support winches, manufacturer SAF
- One-sided support winch operation, on the right in FR

Trailer accessories
- 2 plastic chock blocks with bracket
- 1 extendable rear ladder with large tread surface, according to UVV
- Large rubber bumper, reinforced laterally with steel, at the rear of the rear frame
- Side underrun protection, ECE-compliant
- Rear underrun protection made of steel, ECE compliant
- Storage for the locking bars for loading time (via the side underrun protection)
- PVC mudguards as a "shell" with antispray protection system
- 1 PVC toolbox behind the unit, 165 L

Braking System
- Braking system according to ECE directive
- Two-line pneumatic braking system, ADR-compliant, manufacturer Wabco
- EBS system 2S/2M with RSS
Nsdpfx Aezpc Rboaiowi
- Lifting and lowering device
- Brake line connections in front of the front wall
- Air tank made of steel

Lights and Electrical System
- Rear light carrier made of steel
- Lighting system 24V according to ECE R48
- Multifunction tail lights / manufacturer Hella
- LED license plate light
- 2 LED outline lights
- LED side marker lights
- 2 x 7 and 1 x 15-pin socket, front according to ISO

Wheels and Tires
- Tires 6x 445/45 R 19.5 x 14.00

Floor
- 30 mm thick, multi-glued, non-slip and waterproof - screen printing plate floor, sealed at the cut edges
- Floor joint completely around
- Forklift accessible up to 7,500 kg (!) forklift axle load
- Pallet stop bar on both sides, with holes for lashing

Superstructure
- 3 pairs of center stringers (each with 5 slat pockets)
- 4 rows around, aluminum slats H=100 mm
- Aluminum corner posts screwed on
- Tarp tensioning device at the rear
- Front release device for the side tarp using a linkage lever
- Front wall made of aluminum boards according to VDI/DIN EN 12642 XL (pressure 13,500 daN)
- Front wall reinforcement inside made of screen printing plate
- Two independent side tarps made according to VDI/DIN EN 12642 XL (pressure 10,800 daN) with 24 tarp tensioners (DC specification)
- Diagonal bracing by means of plastic-coated wire ropes between the roof tarp and the cross spreader
- Rear wall as a two-wing door made of aluminum boards according to VDI DIN EN 12642 XL (pressure 8,100 daN)
- Lifting roof Edscha HYBRYD + 50 (roof that can be shifted forward and backward), independ

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.