مقطورة ناقلة سياراتBalhanger
OptiLift 2745 Kipplader Hydraulik Boden
مقطورة ناقلة سيارات
Balhanger
OptiLift 2745 Kipplader Hydraulik Boden
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
4.668 €
(5.555 € إجمالي)
الحالة
جديد
(يعمل بكامل كفاءته)
الموقع
Oelsnitz/Vogtl. 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
4.668 €
(5.555 € إجمالي)
- الموقع:
- Willy-Brandt-Ring 6, 08606 Oelsnitz/Vogtland, Deutschland

اتصل
تفاصيل فنية
- وزن فارغ:
- 690 كجم
- الوزن الأقصى للحمولة:
- 2.010 كجم
- الوزن الإجمالي:
- 2.700 كجم
- طول مساحة التحميل:
- 4.500 مم
- عرض مساحة التحميل:
- 2.160 مم
- الطول الكلي:
- 6.560 مم
- العرض الكلي:
- 2.210 مم
- تعليق:
- آخر
- مقاس الإطار:
- 195/55R10C
- فرامل المقطورة:
- مقطورة مزودة بفرامل
تفاصيل العرض
- معرّف الإعلان:
- A222-52-157
- تحديث:
- آخر مرة في 13.08.2026
وصف
Balhanger OptiLift 2745 ZBH1
Car transporter, tipper, direct drive-on design
- NEW VEHICLE -
Included:
- Intermediate floor, aluminum tread plate
- Simple tipping hydraulics
Technical data:
Iodpfxozicx So Aa Ioba
Permissible total weight 2700 kg
Unladen weight approx. 690 kg
Payload approx. 2010 kg
Dimensions of the loading area 500 x 216 cm (length without drive-on ramp, drive-on ramp + 50 cm)
- Loading area up to the rear light approx. 520 cm
Overall dimensions 706 x 221 cm
Drive-on angle approx. 9°
Tires 195/55R10C
Equipment and construction:
High-loader, tandem axle, maintenance-free rubber suspension axles
V-drawbar with support wheel, automatic 250 kg (optional 500 kg)
Overrun brake with reversing automatic
Frame welded, hot-dip galvanized
Tipping body, tipping around the center of gravity (optional tipping hydraulics, see configurator)
2 platforms, 4mm aluminum perforated sheet, 50 cm wide, with direct drive-on
Manual winch, can be mounted on the left or right
Extendable multi-lights LED
Spare wheel with drawbar holder
Optional accessories at extra cost:
Wheel chocks / wheel straps / VDI set
Wheel shock absorbers, 100 km/h
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Car transporter, tipper, direct drive-on design
- NEW VEHICLE -
Included:
- Intermediate floor, aluminum tread plate
- Simple tipping hydraulics
Technical data:
Iodpfxozicx So Aa Ioba
Permissible total weight 2700 kg
Unladen weight approx. 690 kg
Payload approx. 2010 kg
Dimensions of the loading area 500 x 216 cm (length without drive-on ramp, drive-on ramp + 50 cm)
- Loading area up to the rear light approx. 520 cm
Overall dimensions 706 x 221 cm
Drive-on angle approx. 9°
Tires 195/55R10C
Equipment and construction:
High-loader, tandem axle, maintenance-free rubber suspension axles
V-drawbar with support wheel, automatic 250 kg (optional 500 kg)
Overrun brake with reversing automatic
Frame welded, hot-dip galvanized
Tipping body, tipping around the center of gravity (optional tipping hydraulics, see configurator)
2 platforms, 4mm aluminum perforated sheet, 50 cm wide, with direct drive-on
Manual winch, can be mounted on the left or right
Extendable multi-lights LED
Spare wheel with drawbar holder
Optional accessories at extra cost:
Wheel chocks / wheel straps / VDI set
Wheel shock absorbers, 100 km/h
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2013
99 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 37421... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ










































