مقطورة قلابة ثلاثية الاتجاهاتMEILLER
MZDA 18.23, linke SW abklappbar und Pendelnd
مقطورة قلابة ثلاثية الاتجاهات
MEILLER
MZDA 18.23, linke SW abklappbar und Pendelnd
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
34.950 €
(41.590 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
34.950 €
(41.590 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 13.500 كجم
- الوزن الإجمالي:
- 18.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 4.900 مم
- عرض مساحة التحميل:
- 2.380 مم
- ارتفاع مساحة التحميل:
- 900 مم
تفاصيل العرض
- معرّف الإعلان:
- A222-20-392
- رقم المرجع:
- 6336
- تحديث:
- آخر مرة في 27.06.2026
وصف
Brakes:
* Wabco TEBS-E / ABS (electronic braking system with RSS)
* Emergency release system for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axles:
Psdpozhdxkefx Acnogn
* BPW axles
----Suspension:
* Air suspension
* Automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Electrical system / Lighting:
* Tire pressure monitoring system (TPMS)
* 5-chamber taillights with protective cover
* 15-pole power connector
----Drawbar / Flange coupling:
* Curved central tube drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit)
----General components:
* Aluminum air reservoir
* Welded box-type steering linkage
* Front support jack
* Underrun protection at the rear
* Enclosed plastic individual fenders
* Access ladder on the front left outside on the front wall
----Tipping body:
* Steel 3-sided tipping body with M-Jet side boards
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with sturdy, continuous top rail inclined inwards
* Side walls and tailgate made of 4 mm STEELECT steel (HBW 400)
* Continuous side walls - without center stringer
* Right side wall pivoting via manual central locking - preparation for long lever and hinges for the fold-down side wall
* Left side wall pivoting via manual central locking and foldable with side board spring lifter
* Tailgate pivoting with automatic cam lock and 150 mm rear tailgate
* Manual metering device via chain
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Paintwork:
* Chassis painted in RAL 7021 black-grey
* Painting of the side boards in RAL 9006 white aluminum
----General information:
* Vehicle body complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* 2 available
----Delivery time:
* Immediately available from Egestorf
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
* Wabco TEBS-E / ABS (electronic braking system with RSS)
* Emergency release system for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axles:
Psdpozhdxkefx Acnogn
* BPW axles
----Suspension:
* Air suspension
* Automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Electrical system / Lighting:
* Tire pressure monitoring system (TPMS)
* 5-chamber taillights with protective cover
* 15-pole power connector
----Drawbar / Flange coupling:
* Curved central tube drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit)
----General components:
* Aluminum air reservoir
* Welded box-type steering linkage
* Front support jack
* Underrun protection at the rear
* Enclosed plastic individual fenders
* Access ladder on the front left outside on the front wall
----Tipping body:
* Steel 3-sided tipping body with M-Jet side boards
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with sturdy, continuous top rail inclined inwards
* Side walls and tailgate made of 4 mm STEELECT steel (HBW 400)
* Continuous side walls - without center stringer
* Right side wall pivoting via manual central locking - preparation for long lever and hinges for the fold-down side wall
* Left side wall pivoting via manual central locking and foldable with side board spring lifter
* Tailgate pivoting with automatic cam lock and 150 mm rear tailgate
* Manual metering device via chain
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Paintwork:
* Chassis painted in RAL 7021 black-grey
* Painting of the side boards in RAL 9006 white aluminum
----General information:
* Vehicle body complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* 2 available
----Delivery time:
* Immediately available from Egestorf
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
169 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ




















