مقطورة قلابة ثلاثية الاتجاهاتMEILLER
MZDA 18.23, Bordamatik links, seitl. Rollplane
مقطورة قلابة ثلاثية الاتجاهات
MEILLER
MZDA 18.23, Bordamatik links, seitl. Rollplane
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
42.900 €
(51.051 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
42.900 €
(51.051 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 13.320 كجم
- الوزن الإجمالي:
- 18.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 4.900 مم
- عرض مساحة التحميل:
- 2.380 مم
- ارتفاع مساحة التحميل:
- 900 مم
- معدات:
- نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف الإعلان:
- A221-45-762
- رقم المرجع:
- 6296
- تحديث:
- آخر مرة في 18.06.2026
وصف
Brakes:
* Wabco TEBS-E / ABS (electric braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axle:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Electrical System / Lighting:
Ijdpfx Ajzd I Dceh Dsic
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* 5-chamber tail lights with protective cover
----Drawbar / Fifth Wheel:
* Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit)
----General Components:
* Aluminum air tank, welded box-type drawbar
* Front support jack
* Rear underrun protection
* Enclosed plastic mudguards
----Tipping Body:
* Steel 3-sided tipping body with M-Jet side boards
* Continuous side walls - without center supports
* Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall
* Hydraulically folding left side wall (side board automation)
* Rear tailgate pivoting with automatic cam lock and 150 mm rear gate
* Manual metering device via chain
----Thickness of floor, side walls, front and rear walls:
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with stable, continuous, inward-sloping top rail
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel)
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roll-over Cover:
Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall
----
Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of side boards in RAL 9006 white-aluminum
----General Information:
* Vehicle superstructure complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery Time:
* Immediately, from approximately week 37/2026
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
* Wabco TEBS-E / ABS (electric braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axle:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Electrical System / Lighting:
Ijdpfx Ajzd I Dceh Dsic
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* 5-chamber tail lights with protective cover
----Drawbar / Fifth Wheel:
* Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit)
----General Components:
* Aluminum air tank, welded box-type drawbar
* Front support jack
* Rear underrun protection
* Enclosed plastic mudguards
----Tipping Body:
* Steel 3-sided tipping body with M-Jet side boards
* Continuous side walls - without center supports
* Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall
* Hydraulically folding left side wall (side board automation)
* Rear tailgate pivoting with automatic cam lock and 150 mm rear gate
* Manual metering device via chain
----Thickness of floor, side walls, front and rear walls:
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with stable, continuous, inward-sloping top rail
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel)
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roll-over Cover:
Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall
----
Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of side boards in RAL 9006 white-aluminum
----General Information:
* Vehicle superstructure complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery Time:
* Immediately, from approximately week 37/2026
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
170 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ








