مقطورة منخفضة التحميلMÜLLER-MITTELTAL
ETÜTAR 14,4 Tieflader, LED, Runduml.
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
ETÜTAR 14,4 Tieflader, LED, Runduml.
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
26.500 €
(31.535 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Alsdorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
26.500 €
(31.535 € إجمالي)
- موقع البائع:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.950 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- معدات:
- رافعة خلفية, نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف الإعلان:
- A220-57-293
- رقم المرجع:
- 31941
- تحديث:
- آخر مرة في ٠٤.٠٦.٢٠٢٦
وصف
Müller-Mitteltal ETÜ-TA-R 14.4 Tandem – Low-loader – Platform – Trailer
Available from the 37th week of 2026, inquiry number: 31941. Delivery to your address is possible.
* We would be happy to provide you with an individual offer.
* ----
* GVWR: 14.4t, Payload: 10.95t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27m x 2.47m platform with galvanized front wall 400mm
* Excavator bucket rest made of hardwood, screwed onto the front wall
* Unladen floor height 930mm / Laden floor height 870mm
* One-piece ramps with hot-dip galvanized grating, slip-resistant design, can be pushed together to approx. 20 mm, secured by retaining rods and inclined support.
* Ramp lifter with vertically mounted, adjustable springs for easy one-person operation.
* 4 UVV lashing eyes (LC 6300daN)
* Perforated outer frame (45° bent with hole pattern for lashing straps, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of UVV lashing eyes LC 3000 daN at a distance of approx. 600 mm is possible) with close transverse profiling, high-flanged front and rear end and rear access ramp, hot-dip galvanized.
* 10 UVV lashing eyes LC 3000 daN, can be recessed into the existing hole pattern in the outer frame, in addition
* Further lashing possibilities through holes (Ø 50 mm, LC 1200 daN) in the front and end beams
* Tool box in front of the front wall
* Side marker lights with turn signal control
Bjdpfx Aszbfmqob Ielh
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* Height-adjustable support jacks at the front, folding supports at the rear.
* 2 container locking devices recessed in the front beam
* Drawbar with 40mm drawbar eye (hot-dip galvanized), height adjustable, a 50mm eye is also possible on request
* 1 removable LED marker light at the rear ----
* Leasing, hire purchase, financing, and trade-in are possible.
* e.g. 525 Euros with a 60-month term, no down payment, no residual value.
* ----
* Our opening hours:
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment.
We speak German, we speak English, mowimy po polsku, on parle français
Leasing, financing, and trade-in are possible.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Available from the 37th week of 2026, inquiry number: 31941. Delivery to your address is possible.
* We would be happy to provide you with an individual offer.
* ----
* GVWR: 14.4t, Payload: 10.95t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27m x 2.47m platform with galvanized front wall 400mm
* Excavator bucket rest made of hardwood, screwed onto the front wall
* Unladen floor height 930mm / Laden floor height 870mm
* One-piece ramps with hot-dip galvanized grating, slip-resistant design, can be pushed together to approx. 20 mm, secured by retaining rods and inclined support.
* Ramp lifter with vertically mounted, adjustable springs for easy one-person operation.
* 4 UVV lashing eyes (LC 6300daN)
* Perforated outer frame (45° bent with hole pattern for lashing straps, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of UVV lashing eyes LC 3000 daN at a distance of approx. 600 mm is possible) with close transverse profiling, high-flanged front and rear end and rear access ramp, hot-dip galvanized.
* 10 UVV lashing eyes LC 3000 daN, can be recessed into the existing hole pattern in the outer frame, in addition
* Further lashing possibilities through holes (Ø 50 mm, LC 1200 daN) in the front and end beams
* Tool box in front of the front wall
* Side marker lights with turn signal control
Bjdpfx Aszbfmqob Ielh
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* Height-adjustable support jacks at the front, folding supports at the rear.
* 2 container locking devices recessed in the front beam
* Drawbar with 40mm drawbar eye (hot-dip galvanized), height adjustable, a 50mm eye is also possible on request
* 1 removable LED marker light at the rear ----
* Leasing, hire purchase, financing, and trade-in are possible.
* e.g. 525 Euros with a 60-month term, no down payment, no residual value.
* ----
* Our opening hours:
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment.
We speak German, we speak English, mowimy po polsku, on parle français
Leasing, financing, and trade-in are possible.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
27 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 2404 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ




























