شبه مقطورة

Fliegl Kipp-Container-Chassis SDS 380 30 Fuß

Chassis, semi-trailer, container
Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions
Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring
Without subframe for self-supporting containers
Container attachments:
Locking crossbeam, 2-fold for locking 1 x 30 ft container
24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation
Free support leg spacing or free rear swivel radius approx. 1850 mm
2 chock blocks with holder
Aluminum side underrun protection
Without underrun protection
Semi-fender
With anti-spray flaps according to EC
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm.
(without hose connection). Attention! Tilting angle limited!
Operation hydraulically via truck auxiliary drive
Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut
Axles + Suspension
BPW disc brake axles with 430 mm disc diameter
"Axle/chassis laser-aligned" Reduces tire wear and fuel consumption
Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight
Air suspension
1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h)
Braking system
2-line pneumatic braking system
Color-coded line routing for easy maintenance.
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, without connecting line
24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable
Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS!
With lifting and lowering valve
Vehicle - Driving Stability System
Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale)
Wheels and Tires
385/55 R22.5" manufacturer's choice
Steel rims, factory silver
Electrical system
24 Volt, multi-chamber lights, yellow LED lighting on the side
2 white position lights at the front in LED
2 white/red marker lights at the rear
2 x 7-pole non-interchangeable sockets at the front, without connecting cable
Country of approval / Signs
Germany
Type approval according to EC 2007/46
24/7 service hotline
Prepared for license plate holder, single row
Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear
Paint finish
Frame DB 7350 Novagrau
"10-year warranty against rust"
Support legs black coated
Redjzaz Tkepfx Ag Sou

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.