مقطورة قلابة ثلاثية الاتجاهات

FLIEGL TSK 118 Tandem Dreiseitenkipper 5,0m Kipp Anhäng

Further information

plus pre-carriage / provision from storage location 26639 Wiesmoor €1,280.00 net

Chassis Central Axle Tipping Trailer
Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing
Support leg with gear at the front
Foldable rear support
2 wheel chocks with holders
Steel underrun protection
Full-width rear mudflaps
Quarter-shell fenders
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
Note! Sidewall touches the toolbox when folded down.
Lockable storage space for loading ramps beneath the loading area
WITHOUT ramps
Drawbar for central axle trailer
Drawbar with certified 40 mm towing eye
Kdjdpfxsy Dzlco Amujk
Drawbar height adjustable via spindle, max. adjustment range 300 mm
Axles & Suspension
BPW drum brake axles
"Chassis/undercarriage laser-aligned" to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation)
Wheels and Tyres
235 / 75 R 17.5"
manufacturer’s choice
Steel rims, factory silver
Brake System
2-line air brake system
Color-coded line routing for easy service
Hand spindle parking brake
Integral air tank
ABS and ALB, with ABS connector at the front and connection cable
Caution: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS!
2 non-interchangeable coupling heads at the front, with connection lines to the truck
Electrics
24 Volt, multi-chamber lighting, side yellow LED marker lights
2 white position lights at the front
2 white/red lane lights at the rear
2 x 7-pin non-interchangeable plugs at the front, with connection cable
Hydraulics
Three-way tipping system, hydraulic multi-piston cylinder with lift limiter and safety cable
Low-pressure cylinder up to max. 170 bar, without flow restrictor. If required, needs to be retrofitted on the truck.
Hydraulic connection with SVK plug NW 10/3, incl. connecting hose
Operated hydraulically via truck PTO
Tipping Platform
Robust tipping platform with 4 mm steel floor, steel sidewall construction, continuous, fold-down sidewalls
Non-swing mounted without central locking underneath. Plug-in corner posts at the rear. Rear wall fold-down and swing-mounted, central locking underneath.
Platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom
Sidewall retracting springs (not possible with split sidewalls)
Platform width 2,420 mm
5 pairs of lashing rings in the floor, each rated to 5 tons
Operating Notes
The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while observing permissible axle/support/kingpin loads. (Poor driving and trailing performance possible due to incorrect load distribution)
Approval/Country
Country of registration: Germany
with Dekra inspection and certificate (in accordance with §13 EC-FGV)
24/7 service hotline
Prepared for single-line number plate holder
Contour marking with reflective tape according to ECE R 048, white on sides and red at the rear
Paintwork
Frame hot-dip galvanized including passivation
"15-year guarantee against rust-through"
Sidewalls/platform RAL 5002 ultramarine blue
Note! Platform inside is only primed unless otherwise painted bridge design!

Optional loading ramps €1,280.00 net

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.