شاحنة قلابةUNSINN
UHK 2715-15-13 Rückwärtskipper
شاحنة قلابة
UNSINN
UHK 2715-15-13 Rückwärtskipper
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
3.436 €
(4.089 € إجمالي)
الحالة
جديد
الموقع
Horn-Bad Meinberg 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
3.436 €
(4.089 € إجمالي)
- الموقع:
- Stahler Weg 3, 32805 Horn-Bad Meinberg, DE

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A217-26-433
- رقم المرجع:
- 9935512
- تحديث:
- آخر مرة في ١٦.٠٤.٢٠٢٦
وصف
Rear tipper with electric pump & cordless drill pump
Manufacturer: Unsinn
Model: UHK 2715-15-13
Internal dimensions: 2760 x 1500 x 300 mm (L x W x H)
Permissible total weight: 1,500 kg
Unladen weight: approx. 450 kg
Payload: approx. 1,050 kg (Payload specifications may vary depending on equipment and build)
Electro-hydraulic pump with emergency pump 'Pumpless' for easy tipping with a cordless screwdriver if the battery is low
Integrated battery charger with 230V mains plug
Battery and pump unit safely and dirt-protected stowed in a battery box
Shock absorbers, 100 km/h approval
Integrated ramp compartment with retaining device and folding license plate holder for storing loading ramps under the cargo bed (for easy retrofitting of ramps)
Unique, torsion-resistant longitudinal chassis frame for safe handling and high stability
Closed, fully welded and hot-dip galvanized steel frame profile
Heavy-duty steel floor, continuous across the full vehicle width
Maintenance support strut for securing the tipper bed in tilted position
Reinforced automatic jockey wheel
Maneuvering handle with integrated strap winder for easy handling
Load securing system for more flexibility and efficiency, DEKRA certified
8 lashing points flush-mounted in the steel floor
Lashing points on and under the cargo bed, each loadable up to 1,000 kg, 360° rotatable
Side walls fully foldable and detachable
Rear panel with fold-down steel cladding, including anti-slip protection for loading ramps
Robust cam locks on the side panels
4 plug-in corner posts made of steel
Lighting with 13-pin connector and reversing light
Including vehicle documents
Available options and accessories for this trailer:
Whether mesh extension, steel extension, or side wall extension - choose the right variant and customize your trailer build.
Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension at the front and rear can be perfectly matched with a steel or side wall extension on the sides—without extra effort.
Kdodjy Dbibopfx Amusk
Loading ramps
Drawbar cover
Load securing net
Supports
Anti-theft device
Registration of your new trailer at the vehicle registration office
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Manufacturer: Unsinn
Model: UHK 2715-15-13
Internal dimensions: 2760 x 1500 x 300 mm (L x W x H)
Permissible total weight: 1,500 kg
Unladen weight: approx. 450 kg
Payload: approx. 1,050 kg (Payload specifications may vary depending on equipment and build)
Electro-hydraulic pump with emergency pump 'Pumpless' for easy tipping with a cordless screwdriver if the battery is low
Integrated battery charger with 230V mains plug
Battery and pump unit safely and dirt-protected stowed in a battery box
Shock absorbers, 100 km/h approval
Integrated ramp compartment with retaining device and folding license plate holder for storing loading ramps under the cargo bed (for easy retrofitting of ramps)
Unique, torsion-resistant longitudinal chassis frame for safe handling and high stability
Closed, fully welded and hot-dip galvanized steel frame profile
Heavy-duty steel floor, continuous across the full vehicle width
Maintenance support strut for securing the tipper bed in tilted position
Reinforced automatic jockey wheel
Maneuvering handle with integrated strap winder for easy handling
Load securing system for more flexibility and efficiency, DEKRA certified
8 lashing points flush-mounted in the steel floor
Lashing points on and under the cargo bed, each loadable up to 1,000 kg, 360° rotatable
Side walls fully foldable and detachable
Rear panel with fold-down steel cladding, including anti-slip protection for loading ramps
Robust cam locks on the side panels
4 plug-in corner posts made of steel
Lighting with 13-pin connector and reversing light
Including vehicle documents
Available options and accessories for this trailer:
Whether mesh extension, steel extension, or side wall extension - choose the right variant and customize your trailer build.
Thanks to the clever KOMBILINE system, the extensions can be easily combined. For example, a mesh extension at the front and rear can be perfectly matched with a steel or side wall extension on the sides—without extra effort.
Kdodjy Dbibopfx Amusk
Loading ramps
Drawbar cover
Load securing net
Supports
Anti-theft device
Registration of your new trailer at the vehicle registration office
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
إرسال طلب
هاتف & فاكس
+49 5234 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ





























































