شبه مقطورة بمنصة عمل

FAYMONVILLE Telemax Megatrailer - hydr. gelenkt

Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website.

Selection of features. Complete equipment details upon request.

EQUIPMENT:
* Gooseneck, length approx. 4,100 mm, with central beam
* Extendable load area, length approx. 9,400 mm, with 350 mm x 10° rear bevel and integrated hook-in rail for use with separate aluminum loading ramps
* Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the selected platform length
* Technical fifth wheel load: 18,000 kg
* Suitable for tractor units: 4 x 2 and 6 x 2
* TPMS Tire Pressure Monitoring System in accordance with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables
* Technical axle load: 12,000 kg per axle
* Air suspension with lift/lower valve
* 235/75 R 17.5 3PMSF twin tires, manufacturer of our choice
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic power unit for hydraulic operations (without supply connections installation on the tractor unit)
* 4 pairs of recessed lashing rings in the outer frame of the gooseneck:
- The first three pairs are flat (LC 10,000 daN)
- The rear pair is fold-out (LC 10,000 daN)
* 4 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm
* 2-inch king pin
* Mechanical landing legs with 2-speed gearbox and crank; JOST Modul B, static test load approx. 50,000 kg
* Wooden flooring approx. 32 mm thick, framed in aluminum omega profiles on the gooseneck and platform
* 10 pairs of recessed, flat-mounted, foldable lashing rings in the outer frame of the load area
* One pair of lashing rings (LC 10,000 daN) in front of the last axle and at the end crossmember of the trailer
* All other lashing rings (LC 5,000 daN)
* 6 pairs of stake pockets recessed in the outer frame of the load area for plug-in stakes approx. 100 x 50 mm
* 1 spare wheel holder under the load area, right side when facing forward
* 1 lockable stainless steel (INOX) toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left when facing forward
* Rear crossmember with bevel approx. 350 mm x 10°
* Integrated hook-in rail for loose aluminum loading ramps at the rear crossmember
* 1 pair of drop-down supports at the rear crossmember
* Steering override from front and rear via cable remote control with single-track axle monitoring (no installation on tractor unit)
* Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917)
* 1 LED work light on both left and right of front bulkhead, wired to the tractor unit’s connection rail
* Locking positions at each 500 mm on the extension
* Internal holder for stakes not in use, mounted to the inside of the gooseneck bulkhead
* 4 wheel chocks with holder under the load bed
Psdpfx Anoy Augdjispt
* Galvanised extension sections for platform widening by approx. 230 mm per side (without wooden planks)
* 1 LED work light on both left and right in front of the axles, wired to the connection rail for the tractor unit
* 2 axle load gauges mounted on the left side, including axle load diagram
* 1st axle with traction aid
* Mountings for warning signs under the gooseneck as well as left and right at the rear crossmember
* Acoustic warning signal when reversing
* EU reflector at the rear of the vehicle

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.