مقطورة مع منصة عملMÜLLER-MITTELTAL
ETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
ETÜ-TA-R 21 Tieflader 7m, luftgefedert, LED
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
33.900 €
(40.341 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Alsdorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
33.900 €
(40.341 € إجمالي)
- موقع البائع:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 16.500 كجم
- الوزن الإجمالي:
- 21.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 7.000 مم
- عرض مساحة التحميل:
- 2.470 مم
- معدات:
- رافعة خلفية, نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف الإعلان:
- A215-48-223
- رقم المرجع:
- 11630
- تحديث:
- آخر مرة في ٢٠.٠٣.٢٠٢٦
وصف
Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-loader | Drive-over Platform Trailer
Ref. for inquiries: 11630 Vehicle available immediately from Alsdorf warehouse
NEW VEHICLE incl. COC (Certificate of Conformity)
* Gross weight: 21t, Payload: 16.5t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking via ramp holding rods and inclined support
* Version GG 21t, reinforced frame and axle with axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unloaded
* 7m loading area with 400mm high front wall
* Extended ramps: 3m one-piece, hot-dip galvanized ramps with hot-dip galvanized grating
* Ramp lifters with vertically mounted adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV drop-down lashing brackets (LC 8,000 daN), mounted in existing hole pattern on the 45° outer frame, positioned approx. 1m from front/rear cross member
* 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid of the outer frame
* 2 UVV lashing rings front & rear recessed in the cross member, each with LC 10,000 daN
* Additional lashing options via holes (Ø 50mm, LC 1,200 daN) in the front and end cross beam
* Preparation for retrofitting container locks (container locks available at extra charge)
* Softwood floor, 50mm thick
* Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering
* Tyres: 235/75R 17.5 (8 twin tires) with tire pressure monitoring sensor
* Plastic toolbox in front of the front wall, right side in direction of travel
* LED lighting system
* 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground
* 2 LED reverse lights at the rear
* Flashing side marker lights
* Oversize warning panel
* 1 removable LED beacon incl. holder and installation
* Drop-down supports at the rear, front support foot with geared winch
----
Hire-purchase example from our partner MMV Leasing: €655/month (net) for 60 months, no down payment, and €0 final installment
Other terms available with/without down payment or residual value.
We are an official Müller-Mitteltal dealer
----
* Our business hours:
* Monday to Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside opening hours by appointment
We speak German, English, Russian, Polish, and French
Itsdpeyvxg Usfx Acwsd
* WhatsApp
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Ref. for inquiries: 11630 Vehicle available immediately from Alsdorf warehouse
NEW VEHICLE incl. COC (Certificate of Conformity)
* Gross weight: 21t, Payload: 16.5t, galvanized chassis
* Available end of March 2026
* Platform version with 400mm high front wall, ramp locking via ramp holding rods and inclined support
* Version GG 21t, reinforced frame and axle with axle spacing 1,810 mm
* Deck height approx. 910 mm loaded / approx. 940 mm unloaded
* 7m loading area with 400mm high front wall
* Extended ramps: 3m one-piece, hot-dip galvanized ramps with hot-dip galvanized grating
* Ramp lifters with vertically mounted adjustable springs for easy single-person operation
* Load securing package:
* 4 UVV drop-down lashing brackets (LC 8,000 daN), mounted in existing hole pattern on the 45° outer frame, positioned approx. 1m from front/rear cross member
* 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid of the outer frame
* 2 UVV lashing rings front & rear recessed in the cross member, each with LC 10,000 daN
* Additional lashing options via holes (Ø 50mm, LC 1,200 daN) in the front and end cross beam
* Preparation for retrofitting container locks (container locks available at extra charge)
* Softwood floor, 50mm thick
* Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering
* Tyres: 235/75R 17.5 (8 twin tires) with tire pressure monitoring sensor
* Plastic toolbox in front of the front wall, right side in direction of travel
* LED lighting system
* 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground
* 2 LED reverse lights at the rear
* Flashing side marker lights
* Oversize warning panel
* 1 removable LED beacon incl. holder and installation
* Drop-down supports at the rear, front support foot with geared winch
----
Hire-purchase example from our partner MMV Leasing: €655/month (net) for 60 months, no down payment, and €0 final installment
Other terms available with/without down payment or residual value.
We are an official Müller-Mitteltal dealer
----
* Our business hours:
* Monday to Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside opening hours by appointment
We speak German, English, Russian, Polish, and French
Itsdpeyvxg Usfx Acwsd
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
24 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 2404 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ




























