شاحنة قلابة

Volvo FMX 500 Volvo FMX13 500 8X4 Euro 6e L13 Euromix...

= Further Options and Accessories =

- Heated mirrors
- Leaf suspension
- Bluetooth
- Differential lock
- Air conditioning
- Air-sprung seats
- PTO (Power Take-Off)
- Sun visor

= Remarks =

VOLVO FMX13 500 8x4 EURO 6e L13 EuromixMTP Tipper Body 16m³ - 18m³ - 20m³ (HARDOX)

Vehicle specifications:

Engine – New D13K500, 12.8 litres, 500 HP at 1,400–1,800 rpm, peak torque 2,500 Nm at 1,000–1,400 rpm, Euro 6e
Transmission – AT2612, 12-speed "I-Shift" automated gearbox, suitable for gross combination weights up to 60 tonnes
Emission standard – Euro VI, Stage E
Engine brake – Volvo Engine Brake+ and exhaust pressure regulator, max. braking power D13: 375 kW / D17: 525 kW
Wheelbase – 4,350 mm
Design gross combination weight – 44 tonnes
Drive axle ratio – 3.33:1
Front axle suspension – 3-leaf parabolic springs
Front axle load capacity – 16 tonnes (2 × 8 tonne front axles)
Fuel tank, left front – 290 litres, positioned between first and second axle
AdBlue tank – chassis-mounted on the right, 57 litres, between 1st and 2nd axle
Rear underrun protection – aluminium, fixed, slim, EC approved
Front axle tyres – 315/80R22.5 – Drive axle tyres – 315/80R22.5
Tyre pressure monitoring system
I-See predictive cruise control (map-based topographical data, lower operating settings)
Cruise control – with I-Roll and I-Cruise, controls on the steering wheel
Instrumentation – High-performance 12" fully digital cluster
DPF regeneration switch – for manual control and deactivation
Start acceleration limiter – DEACTIVATED
Electronic Stability Control (ESC) for low centre of gravity loads
Forward Collision Warning with AEBS emergency brake assist
Cab climate control – electronically regulated air conditioning with sun sensor
GSR compliant, rear-mounted camera at the end of the frame
Toll pre-equipment kit for "Toll Collect" (Germany)
Additional cab insulation – extra-thick insulation layer
Cab colour – Pure White – 1108White
Daytime running lights – V-shaped

Tipper body specifications:

Euromix MTP TMK 16m³ - 18m³ - 20m³ tipper (HARDOX)
Half-round design
CE standard
Floor Hardox 450 – 8 mm
Sides Hardox 450 – 6 mm
Pendulum tailgate
Spare wheel carrier with hoist
Aluminium mudguards
Versatile lighting options
Access steps to tipping body (steps located inside the tipper body)
EuromixMTP scissor-type tipping stabiliser

Accessories:

Hydraulically opening tailgate
Tarpaulin manual or electric
Asphalt chute
Toolbox
Shovel and broom holder
Fire extinguisher
Work lights
Sliding tarpaulin, manual or
electric, with or without
canopy
Foldable underrun protection systems
Partial discharge for small areas

EUROMIX REAR TIPPER – DURABLE AND ROBUST FOR YOUR OPERATIONS!

= Further Information =

Year of manufacture: 2026
Front axle 1: Steered
Front axle 2: Steered
Hsdpsypa Rtofx Af Esnk
Number of cylinders: 6
Gross vehicle weight: 43,999 kg
Body manufacturer: EuromixMTP TMK 18m³ - 20m³
APK (technical inspection): New TÜV at delivery
Please contact Harun Cevik, Jamila Azzi or Denis Omeragic for further information.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.