مقطورة منخفضة التحميل
MAX Trailer 600
مقطورة منخفضة التحميل
MAX Trailer 600
سعر ثابت دون ضريبة القيمة المضافة
56.600 €
(67.920 € إجمالي)
الحالة
جديد
الموقع
Marz 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
56.600 €
(67.920 € إجمالي)
- موقع البائع:
- Bundesstr. 9, 7221 Marz, النمسا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 33.975 كجم
- الوزن الإجمالي:
- 42.000 كجم
- تكوين المحور:
- ٣ محاور
- العرض الكلي:
- 2.540 مم
- الارتفاع الكلي:
- 860 مم
- معدات:
- نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف القائمة:
- A213-65-417
- الرقم المرجعي:
- MAX600-4A
- التحديث الأخير:
- في ٠٣.٠٣.٢٠٢٦
الوصف
MAX Low Loader Trailer NEW | 9.3 m Loading Platform | Ramps | Approx. 34 t Payload | from €56,600
New vehicle – individually configurable to your specific application.
Robust low loader trailer with stepped loading platform and high-performance ramp system for professional transport of construction machinery, vehicles, and heavy equipment.
Designed for high payload capacity, durability, and safe operation on construction sites.
---Highlights---
• Approx. 33,975 kg payload
• Stepped loading platform with rear bevel
• Hydraulic, sliding steel ramps
• Ramp load capacity up to 40,000 kg per pair
• Drawbar design with turntable
• High-strength steel construction
• BPW axles with air suspension
• EBS braking system
---Technical Specifications---
• Gross weight: 42,000 kg
• Unladen weight approx.: 8,025 kg (±3%)
• Payload approx.: 33,975 kg
• Loading platform length: 9,300 mm
• Overall width: 2,540 mm
• Loading height at max. load: approx. 860 mm
• Axle spacing: 1,360 mm
• Maximum speed: 80 km/h
---Standard Equipment---
• Stepped loading platform with approx. 48 mm hardwood floor
• Chequer plate cover above axles
• Multiple lashing points up to LC 10,000 daN
• Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm)
• Hydraulic ramp lifting system
• High-strength fine-grain steels S355 / S690
• BPW axles, air-suspended, drum brakes
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
---Included Options / Features---
• Turntable with approx. 1,750 mm long drawbar and towing eye Ø 50 mm
• Coupling height loaded approx. 630–810 mm
• Rear electro-hydraulic unit under the loading platform
• TPMS tire pressure monitoring system (ECE R141)
• Cover plates between ramps and loading platform
• Ramp control valves on the right side
• Galvanized supports beneath the platform’s rear incline
• Rear revolving beacon holder
• Extendable warning signs with LED
• Reflective tape in accordance with EU regulations
• Additional license plate mount, rear right
Bcsdpfsypazlox Ab Esw
Other options and customizations available at any time – we configure your vehicle exactly to your requirements.
Sample photo. Equipment may vary depending on configuration.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
New vehicle – individually configurable to your specific application.
Robust low loader trailer with stepped loading platform and high-performance ramp system for professional transport of construction machinery, vehicles, and heavy equipment.
Designed for high payload capacity, durability, and safe operation on construction sites.
---Highlights---
• Approx. 33,975 kg payload
• Stepped loading platform with rear bevel
• Hydraulic, sliding steel ramps
• Ramp load capacity up to 40,000 kg per pair
• Drawbar design with turntable
• High-strength steel construction
• BPW axles with air suspension
• EBS braking system
---Technical Specifications---
• Gross weight: 42,000 kg
• Unladen weight approx.: 8,025 kg (±3%)
• Payload approx.: 33,975 kg
• Loading platform length: 9,300 mm
• Overall width: 2,540 mm
• Loading height at max. load: approx. 860 mm
• Axle spacing: 1,360 mm
• Maximum speed: 80 km/h
---Standard Equipment---
• Stepped loading platform with approx. 48 mm hardwood floor
• Chequer plate cover above axles
• Multiple lashing points up to LC 10,000 daN
• Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm)
• Hydraulic ramp lifting system
• High-strength fine-grain steels S355 / S690
• BPW axles, air-suspended, drum brakes
• EBS braking system (2S/2M) with spiral cable
• LED lighting ASPÖCK NORDIK
---Included Options / Features---
• Turntable with approx. 1,750 mm long drawbar and towing eye Ø 50 mm
• Coupling height loaded approx. 630–810 mm
• Rear electro-hydraulic unit under the loading platform
• TPMS tire pressure monitoring system (ECE R141)
• Cover plates between ramps and loading platform
• Ramp control valves on the right side
• Galvanized supports beneath the platform’s rear incline
• Rear revolving beacon holder
• Extendable warning signs with LED
• Reflective tape in accordance with EU regulations
• Additional license plate mount, rear right
Bcsdpfsypazlox Ab Esw
Other options and customizations available at any time – we configure your vehicle exactly to your requirements.
Sample photo. Equipment may vary depending on configuration.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
تقديم الطلب
الهاتف & فاكس
+43 5338 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


















