مقطورة نصف منخفضة رافمن بسرير متحركMeusburger
MTS-3 hydr.klapp-Rampen Hebebett Lenkach
مقطورة نصف منخفضة رافمن بسرير متحرك
Meusburger
MTS-3 hydr.klapp-Rampen Hebebett Lenkach
السعر الافتتاحي دون ضريبة القيمة المضافة
40.900 €
(48.671 € إجمالي)
سنة الصنع
2015
الحالة
مستعمل
الموقع
Sindelfingen 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
السعر الافتتاحي دون ضريبة القيمة المضافة
40.900 €
(48.671 € إجمالي)
- الموقع:
- Kolumbusstraße 9, 71063 Sindelfingen, Deutschland

اتصل
تفاصيل فنية
- وزن فارغ:
- 12.100 كجم
- الوزن الأقصى للحمولة:
- 35.900 كجم
- الوزن الإجمالي:
- 48.000 كجم
- تكوين المحور:
- 3 محاور
- الحمولة المحورية المسموح بها (المحور 1):
- 10.000 كجم
- الحمولة المسموح بها للمحور (المحور 2):
- 10.000 كجم
- الحمولة المحورية المسموح بها (المحور 3):
- 10.000 كجم
- التسجيل الأول:
- 07/2015
- طول مساحة التحميل:
- 13.760 مم
- عرض مساحة التحميل:
- 2.550 مم
- الطول الكلي:
- 14.180 مم
- العرض الكلي:
- 2.550 مم
- الارتفاع الكلي:
- 3.630 مم
- تعليق:
- هواء
- مقاس الإطار:
- 235/75R17,5
- قاعدة العجلات:
- 1.310 مم
- السرعة القصوى:
- 90 كم/س
- لون:
- برتقالي
- فرامل المقطورة:
- مقطورة مزودة بفرامل
- معدات:
- نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف القائمة:
- A212-06-460
- التحديث الأخير:
- في ١٠.٠٢.٢٠٢٦
الوصف
MEUSBURGER MTS-3
Low-loader from first owner, maintained in the workshop and in very good condition! Under 400,000 km.
Fedpfxsyigq Re Ac Nofu
New TÜV!
Optional with MAN TGX 18.440 BLS tractor unit, first registered 07/2015, 400,000 km, at an additional cost.
3x BPW ECO axles with air suspension
1st axle liftable
3rd axle is a friction-steered trailing axle with electric and mechanical lock. Steering of the 3rd axle during maneuvering via two hydraulic cylinders operated by wireless remote control.
Gross weight (2-axle tractor unit): 48,000 kg
Gross weight (3-axle tractor unit): 57,000 kg
Fifth wheel load: 18,000 kg
Payload (2-axle tractor unit): 28,500 kg
Payload (3-axle tractor unit): 36,000 kg
Rear axle load: 30,000 kg
Unladen weight: 12,100 kg
Overall width: 2,550 mm
Length of gooseneck platform approx. 4,015 mm, front bevel approx. 500x56 mm
Length of low-bed platform approx. 9,750 mm, rear bevel approx. 1,000x100 mm
Loading height approx. 920 mm
Fifth wheel height approx. 1,120 mm
Front drop-leg supports
Rear hydraulic support powered by electro-hydraulic unit for the ramps
Wheelbase: 1,310 / 1,410 mm
Centralized grease lubrication with electric pump
LED work lights
Floor: Welded grating 30/30/5 mm, hot-dip galvanized, across the entire loading area in the low-bed, on the ramps and the upper deck
Ramps: 2-part special ramps with mechanical extension approx. 2,850 + 1,850 mm, with a maximum incline of 8°. Ramp width approx. 800 mm, center adjustable down to approx. 50 mm. Hydraulic lateral adjustment to a total width of 2,750 mm. Load capacity 25 t. Ramp operation via hydraulic pump unit. Power supply via NATO socket.
Hydraulically operated ramp at the gooseneck approx. 3,450 mm long, allowing access to the upper deck across the entire vehicle width, can tolerate 10 t crossing.
5x PVC toolboxes 600/450/400 mm
Electric winch ALPHA 17.5, 24 volts, 8.0 t pulling force, with 25 m x 12 mm steel cable, with hook, incl. cable guide window and radio remote control / + cable remote control
Total of 64 heavy-duty lashing rings (8 t)
Paintwork RAL 2002 blood orange
Tyres: 235/75R17.5 10/10/11/11 mm 6/7/7/7 mm 9/7/8/9 mm
Leasing/financing available on request – immediate processing, also without down payment! Further information and requirements on request.
The vehicle description serves solely for general identification of the vehicle. Information, images, and descriptions are given without guarantee! Equipment must be checked separately as needed. The seller accepts no liability for typographical or data transmission errors. Subject to prior sale and errors.
Thank you for your interest! We look forward to your visit.
Our SERVICE
We gladly accept your used vehicle in trade-in.
30-day export license plates including insurance
EUR-1 & all customs documents for export
TÜV / SP / UVV / tachograph inspection / OBU installation
Professional delivery to customer
Transfer from Stuttgart Airport / Sindelfingen train station to us by arrangement
Additional attachments and further individual customer requests can be retrofitted after consultation.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Low-loader from first owner, maintained in the workshop and in very good condition! Under 400,000 km.
Fedpfxsyigq Re Ac Nofu
New TÜV!
Optional with MAN TGX 18.440 BLS tractor unit, first registered 07/2015, 400,000 km, at an additional cost.
3x BPW ECO axles with air suspension
1st axle liftable
3rd axle is a friction-steered trailing axle with electric and mechanical lock. Steering of the 3rd axle during maneuvering via two hydraulic cylinders operated by wireless remote control.
Gross weight (2-axle tractor unit): 48,000 kg
Gross weight (3-axle tractor unit): 57,000 kg
Fifth wheel load: 18,000 kg
Payload (2-axle tractor unit): 28,500 kg
Payload (3-axle tractor unit): 36,000 kg
Rear axle load: 30,000 kg
Unladen weight: 12,100 kg
Overall width: 2,550 mm
Length of gooseneck platform approx. 4,015 mm, front bevel approx. 500x56 mm
Length of low-bed platform approx. 9,750 mm, rear bevel approx. 1,000x100 mm
Loading height approx. 920 mm
Fifth wheel height approx. 1,120 mm
Front drop-leg supports
Rear hydraulic support powered by electro-hydraulic unit for the ramps
Wheelbase: 1,310 / 1,410 mm
Centralized grease lubrication with electric pump
LED work lights
Floor: Welded grating 30/30/5 mm, hot-dip galvanized, across the entire loading area in the low-bed, on the ramps and the upper deck
Ramps: 2-part special ramps with mechanical extension approx. 2,850 + 1,850 mm, with a maximum incline of 8°. Ramp width approx. 800 mm, center adjustable down to approx. 50 mm. Hydraulic lateral adjustment to a total width of 2,750 mm. Load capacity 25 t. Ramp operation via hydraulic pump unit. Power supply via NATO socket.
Hydraulically operated ramp at the gooseneck approx. 3,450 mm long, allowing access to the upper deck across the entire vehicle width, can tolerate 10 t crossing.
5x PVC toolboxes 600/450/400 mm
Electric winch ALPHA 17.5, 24 volts, 8.0 t pulling force, with 25 m x 12 mm steel cable, with hook, incl. cable guide window and radio remote control / + cable remote control
Total of 64 heavy-duty lashing rings (8 t)
Paintwork RAL 2002 blood orange
Tyres: 235/75R17.5 10/10/11/11 mm 6/7/7/7 mm 9/7/8/9 mm
Leasing/financing available on request – immediate processing, also without down payment! Further information and requirements on request.
The vehicle description serves solely for general identification of the vehicle. Information, images, and descriptions are given without guarantee! Equipment must be checked separately as needed. The seller accepts no liability for typographical or data transmission errors. Subject to prior sale and errors.
Thank you for your interest! We look forward to your visit.
Our SERVICE
We gladly accept your used vehicle in trade-in.
30-day export license plates including insurance
EUR-1 & all customs documents for export
TÜV / SP / UVV / tachograph inspection / OBU installation
Professional delivery to customer
Transfer from Stuttgart Airport / Sindelfingen train station to us by arrangement
Additional attachments and further individual customer requests can be retrofitted after consultation.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
تقديم الطلب
الهاتف & فاكس
+49 7031 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ














































































