مقطورة نقل منخفضةHumbaur
HBT 106224 BS Basic abgeschrägt
مقطورة نقل منخفضة
Humbaur
HBT 106224 BS Basic abgeschrägt
سعر ثابت دون ضريبة القيمة المضافة
20.890 €
(24.859 € إجمالي)
الحالة
جديد
الموقع
Burghaun 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
20.890 €
(24.859 € إجمالي)
- الموقع:
- Burghaun, ألمانيا

اتصل
تفاصيل فنية
- تكوين المحور:
- محورين
- معدات:
- نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف القائمة:
- A211-20-182
- الرقم المرجعي:
- hbt106224-1
- التحديث الأخير:
- في ٢٩.٠١.٢٠٢٦
الوصف
Humbaur HBT 106224 BS Basic, tapered version
Technical data:
Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
External dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
Gross vehicle weight: 11,900 kg
Payload: approx. 9,100 kg
Wheelbase: 990 mm
Tyres: 235/75 R17.5 inches
Loading height: approx. 920 mm
Drawbar length: approx. 1800 mm
Coupling height: approx. 750-1000 mm
Ramp angle: approx. 16°
Plank length: approx. 2600 mm
Plank width: approx. 540 mm
3 pairs of lashing rings, 3000 kg per lashing point; rings recessed in the platform floor
7 pairs of lashing rings, 1000 kg per lashing point; rings integrated in the external frame
Standard equipment:
Axles: Axles from renowned manufacturers
Suspension: Low-maintenance parabolic suspension with load compensation
Tyres: Manufacturer’s tyres of choice on steel rims
Braking system: ABS braking system per ECE directive, with ALB function
ABS plug connection ISO 7638
Spindle parking brake
2 interchangeable coupling heads (red/yellow) ISO 1728
Towing installation: Drawbar with DIN screw towing eye Ø 40 mm, galvanised, infinitely adjustable via crank
Electrics: 24V lighting system with multifunction rear lights and LED side marker lights
15-pin connector for lighting
Frame: Heavy-duty, welded and hot-dip galvanised frame
Tapered rear end, 12° incline
Floor: 40 mm softwood planks
Side panels: Anodised aluminium side panels, laterally foldable and removable
Corner stanchions, galvanised, insertable front and rear
Ramps: 2 foldable steel ramps, one-piece, galvanised, laterally adjustable
Ramp lifters: 1 gas strut per ramp
Ramp lock at rear stanchion
Ramp coating: galvanised grating
Supports: Reinforced 12 t gearbox support winch with load and fast gear
2 telescopic folding supports at left and right rear of vehicle
Features: Steel mudguards with antispray mats
Side underrun protection up to the 1st axle, foldable
2 wheel chocks with holder
Contour marking at side and rear
Space for two-line licence plate on the left ramp
A leasing or financing offer is available on request.
Mr. Seidel (Tel.) will be happy to assist you.
Further information is available on our homepage.
... Subject to errors, changes, and prior sale!!!
= Additional information =
GVW: 11,900 kg
External dimensions: 0 x 2550 x 3260
Psdjyfvg Ajpfx Ah Isgg
Please contact Tobias Ebert for further information.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Technical data:
Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
External dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
Gross vehicle weight: 11,900 kg
Payload: approx. 9,100 kg
Wheelbase: 990 mm
Tyres: 235/75 R17.5 inches
Loading height: approx. 920 mm
Drawbar length: approx. 1800 mm
Coupling height: approx. 750-1000 mm
Ramp angle: approx. 16°
Plank length: approx. 2600 mm
Plank width: approx. 540 mm
3 pairs of lashing rings, 3000 kg per lashing point; rings recessed in the platform floor
7 pairs of lashing rings, 1000 kg per lashing point; rings integrated in the external frame
Standard equipment:
Axles: Axles from renowned manufacturers
Suspension: Low-maintenance parabolic suspension with load compensation
Tyres: Manufacturer’s tyres of choice on steel rims
Braking system: ABS braking system per ECE directive, with ALB function
ABS plug connection ISO 7638
Spindle parking brake
2 interchangeable coupling heads (red/yellow) ISO 1728
Towing installation: Drawbar with DIN screw towing eye Ø 40 mm, galvanised, infinitely adjustable via crank
Electrics: 24V lighting system with multifunction rear lights and LED side marker lights
15-pin connector for lighting
Frame: Heavy-duty, welded and hot-dip galvanised frame
Tapered rear end, 12° incline
Floor: 40 mm softwood planks
Side panels: Anodised aluminium side panels, laterally foldable and removable
Corner stanchions, galvanised, insertable front and rear
Ramps: 2 foldable steel ramps, one-piece, galvanised, laterally adjustable
Ramp lifters: 1 gas strut per ramp
Ramp lock at rear stanchion
Ramp coating: galvanised grating
Supports: Reinforced 12 t gearbox support winch with load and fast gear
2 telescopic folding supports at left and right rear of vehicle
Features: Steel mudguards with antispray mats
Side underrun protection up to the 1st axle, foldable
2 wheel chocks with holder
Contour marking at side and rear
Space for two-line licence plate on the left ramp
A leasing or financing offer is available on request.
Mr. Seidel (Tel.) will be happy to assist you.
Further information is available on our homepage.
... Subject to errors, changes, and prior sale!!!
= Additional information =
GVW: 11,900 kg
External dimensions: 0 x 2550 x 3260
Psdjyfvg Ajpfx Ah Isgg
Please contact Tobias Ebert for further information.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2007
تقديم الطلب
الهاتف & فاكس
+49 6652 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ






